Dynamics Response Simulation Analysis of Underground Space Semi-suspended Lanes under Double-decker Vehicle Loads
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 8
Abstract
Objective The new prestressed hanging wall semi-suspended lane structure in underground complex offers advantages of aesthetic appearance and large clearance. However, the research on the mechanical properties of the new structure is still in the initial stage, necessitating an in-depth study on the mechanical characteristics of this semi-suspended lane structure. Method Based on an interval of the semi-suspended lane slab tunnel in Shenzhen Huangmugang Underground Comprehensive Transportation Hub, a 3D finite element model of the underground complex semi-suspended lane slab is established using Midas/GTS software. The dynamics response laws of displacement, acceleration, and stress under the influence of double-decker vehicle loads are analyzed. Result & Conclusion The results indicate that under vehicle dynamic loads, the displacement and acceleration response are the highest at lane slab center and gradually decrease towards the side wall connections. The peak displacement response of the lane slab is approximately 4.6 to 12.3 times greater than that of the hanging wall, roof slab and side wall, while the peak acceleration response of the above three places is about 4.0% to 21.6% of that of the lane slab center. Under dynamic loads, significant stress response occurs at the lane slab center and its connection to side wall, with a stress concentration observed at these connection points, showing slight asymmetrical deformation characteristics. The displacement and acceleration response amplitude of the hanging wall are notably affected by the top-decker vehicle loads, with increasing amplitudes significantly higher than in other areas.
Authors and Affiliations
Xinsheng ZHANG
Keywords
Related Articles
- EP ID EP742705
- DOI 10.16037/j.1007-869x.2024.08.034
- Views 27
- Downloads 0
Design and Research of Dynamic Loading System for High-speed EMU Axle Box Bearing Reliability Test Bench
Objective Bench test is a primary technical means for studying the performance of high-speed EMU (electric multiple units) axle box bearings. Accurately simulating the practical operational load conditions of axle box be...
Identification Algorithm of Rail Transit Pantograph-catenary Contact Force Abnormality Based on LSTM Prediction Error
Objective Contact force is a crucial aspect of comprehensive detection in the rail transit PC (pantograph-catenary) system and serves as an important evaluation factor of PC system performance. However, during the detect...
Analysis and Application of Stratum Support Stress Under Action of Foundation Pit Retaining Pile
[Objective] Foundation pit retaining piles play a vital role in building construction. In order to ensure the safety and stability of foundation pit construction, it is necessary to make in-depth study on the stress dist...
Research Progress on Structural Performance of Prefabricated Underground Station with Open-Cut Method
Objective At present, the structural system of prefabricated underground stations in China presents diversified development characteristics, but lacks systematic classification. Therefore, the research progress on the st...
Docking Scheme of Shanghai Rail Transit Technical Security System with External Systems
Objective To meet the requirements of external entities for accessing video surveillance images from Shanghai rail transit system, and to ensure the normal, stable and secure transmission of these images, it is necessary...