Effect of Cutter Width on Shear Force during Grooving
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2014, Vol 2, Issue 2
Abstract
In this paper contains the determination of the cutting forces with experimental measurements according to the variations in the cutting parameters during grooving operation to the outer surface and the effect of the insert width on the cutting forces. For this purpose; a variety of experiments were carried out the AISI 1050 work-piece material with grooving insert widths have 2 mm, 4 mm, and 6 mm using different cutting parameters. The cutting forces that occur during grooving operation were measured by Kistler 9257B dynamometer. The study results showed that the feeding rate value is more decisive than the cutting speed in terms of the magnitude of the cutting forces, the passive forces are greater than the primary cutting forces and the axial forces are negligible compared to other cutting forces.
Authors and Affiliations
Abdullah KURT, Serkan BAKIR
Keywords
Related Articles
- EP ID EP469312
- DOI -
- Views 122
- Downloads 0
The Effects of Shot Peening parameters on the subsurface properties of AA7075 T6 aluminum alloy
Shot peening (SP) is an important mechanical surface treatment widely used to improve the fatigue life of mechanical components operating under dynamic loads which have been specifically used in automotive and aerospace...
A new approach to filtering spam SMS: Motif Patterns
Along with the widespread of every technology, it comes with many problems. Mobile Short Message Service (SMS), which is widely used in mobile technologies, has brought many problems. The most important problem of SMS is...
Effects of Pressing and Sintering on Pore Morphology and Microstructural Properties in AA 2014 Alloy
In this study AA 2014 alloy powder was produced powder metallurgy gas atomization method. Experiment samples were produced by being pressed the powders which average sizes were 90,66 μm under 650MPa having optimum pressi...
Scale Effect of İntak-Entrance Profile On An Air-Entraining Vortex
Scale Effect of İntak-Entrance Profile On An Air-Entraining Vortex
Turkey's Energy Efficiency Potential and Projections
Currently, due to decreasing fossil energy resources and insufficient renewable and alternative energy resources, humankind has realized the value of energy and tried to use energy resources more efficiently. In this stu...