Effect of evaporator-condenser diameter ratio (d/D) on thermal performance of the tapering heat pipe with various heat sources

Abstract

<p class="MDPI17abstract">In the present study, a new tapering heat pipe design had been developed to enhance the thermal performances. Boiling visualization in the tapering heat pipe is investigated to provide the detailed information of bubbles nucleation. Experiment was conducted in the tapering heat pipe with variation of the evaporator (d) to condenser (D) diameter ratio. The values of d/D are varied at 1/1; 1/2; 1/3 and 1/4. Heat load was generated at the evaporator section using heater DC-Power supply at 30, 40 and 50 Watt. The visualization technique was developed by using a transparent glass tube and the images of boiling bubbles were captured by SLR camera. The glass tube inclination is 45° and integrated with the NI-9211 and c-DAQ 9271 module. K-type thermocouple was set at the evaporator and condenser sections for measurement of boiling temperatures in the tapering heat pipe. Based on the results, it can be noted that variations of heat load and diameter ratio (d/D) of the evaporator and condenser affect the size and shape of boiling bubbles, as well as the nucleation temperature on the tapering heat pipe. The heat transfer coefficient tends to increase at a heat load of 50 W and diameter ratio d/D=1/4.</p>

Authors and Affiliations

Sarip Sarip, Sudjito Soeparman, Lilis Yuliati, Moch. Agus Choiron

Keywords

Related Articles

Assessment of the stability of aquatic ecosystems development on the basis of indicators of the macrophytes fluctuating asymmetry

<p>In order to implement the provisions of the EU Water Framework Directive 2000/60/EU, the theoretical and methodological principles of applying the method of instantaneous biomonitoring of the stability of aquatic ecos...

Determining strength indicators for the bearing structure of a covered wagon's body made from round pipes when transported by a railroad ferry

Improving the efficiency of transportation process through international transport corridors promotes the development of interoperable systems. Successful functioning of the interoperability of transportation is possible...

Calculation of toothed gear mechanisms in machines and assemblies considering the effect of lubricants

<p>The basic criteria of operational efficiency of most toothed gear mechanisms is the contact endurance of the conjugated surfaces of the teeth and the flexural endurance of teeth legs. In this case, the calculation bas...

A study of multilayered electrochromic platings based on nickel and cobalt hydroxides

The multilayered electrochromic films based on Ni(OH)<sub>2</sub> and Co(OH)<sub>2</sub> have been prepared using sequential cathodic template deposition for solutions containing polyvinyl alcohol, nickel nitrate and cob...

Development of a model for determining a priority sequence of power transformers out of service

<p>The research is devoted to the development of a model and algorithm for making decisions on determining the priority of power transformers out of service. Reducing the reliability of EPS operation, caused by the objec...

Download PDF file
  • EP ID EP528205
  • DOI 10.15587/1729-4061.2018.141812
  • Views 75
  • Downloads 0

How To Cite

Sarip Sarip, Sudjito Soeparman, Lilis Yuliati, Moch. Agus Choiron (2018). Effect of evaporator-condenser diameter ratio (d/D) on thermal performance of the tapering heat pipe with various heat sources. Восточно-Европейский журнал передовых технологий, 5(8), 52-57. https://www.europub.co.uk/articles/-A-528205