Effects of Fit Clearance and Viscosity of Lubricating Oil on Shaft Center Orbit of Camshaft
Journal Title: Power Engineering and Engineering Thermophysics - Year 2023, Vol 2, Issue 1
Abstract
In an oil-film lubricating system, fit clearance and the different types of lubricating oil can result in changes in the orbit of shaft center, thereby affecting the stability of the system. Subject of this paper is the camshaft lubricating system of airspace engine, to figure out the effects of fit clearance and the type of lubricating oil on the shaft center orbit of camshaft, in this study, a 3D model of the camshaft lubricating system was built for simulation purpose based on Reynolds equation, and the calculation results suggest that, as the fit clearance grows larger, the convergence position of shaft center gradually moves away from the starting position, and the stability of shaft center declines; in terms of the type of lubricating oil, the higher the viscosity of the lubricating oil, the closer of the position of shaft center to the starting point, and the higher the stability. Our research method can be applied to common oil-film lubricating systems and we hope it could provide a theoretical evidence for the selection of fit clearance and type of lubricating oil for such systems.
Authors and Affiliations
Zishan Zhang, Yu Wang
Keywords
Related Articles
- EP ID EP732016
- DOI https://doi.org/10.56578/peet020104
- Views 67
- Downloads 0
Optimization of Shell and Tube Condenser Effectiveness via PSO Algorithm Coupled with Forced Convection Characterization in Multiphase Systems
In the design of shell and tube heat exchangers encompassing a condensing zone, meticulous attention is required due to the complexities surrounding forced convection in multiphase systems. Despite extensive research, th...
Review of Compression Ignition Engine Powered by Biogas and Hydrogen
Unsustainable fossil fuels are mainly used to generate power in compression ignition (CI) engines in industry now. Due to fossil fuel depletion and potential environmental hazards, it is necessary for researchers to find...
Optimal Operation Control of Composite Ground Source Heat Pump System
During the operation of the ground source heat pump (GSHP) system, the operations of the chiller system should be controlled by adjusting the difference between water temperature and wet bulb temperature. Therefore, it i...
Parametric Analysis of Nonlinear Bi-Stable Piezoelectric Energy Harvester Based on Multi-Scale Method
Given the geometric nonlinearity of the piezoelectric cantilever beam, this study establishes a distributed parameter model of the nonlinear bi-stable cantilever piezoelectric energy harvester, following the generalized...
Influence of Nanoparticle Concentrations on Heat Transfer in Nano-Enhanced Phase Change Materials
This investigation examines the effects of varied nanoparticle concentrations, such as zinc oxide (ZnO), copper oxide (CuO), and aluminum oxide (Al2O3), on the mass fraction and melting characteristics within nano-enhanc...