Effects of the Laundering Process on Dimensional and Physical Properties of Plain and Lacoste Fabrics Made from Modal/combed Cotton Blended Yarns
Journal Title: Fibres and Textiles in Eastern Europe - Year 2017, Vol 25, Issue 4
Abstract
In this study, dimensional and some physical properties of plain (single jersey) and lacoste knitted fabrics made from 50/50 modal/combed cotton blended yarns (tex 21 and 15) were investigated. Twelve weft knitted fabrics were produced with two different structures and three different densities (loose, medium, tight). For physical properties, the fabric weight per unit area, fabric thickness, bursting strength, air permeability and dimensional stability were evaluated. We focused on the dimensional stability properties of outwear knitted fabrics. The total dimensional change of the fabric’s dimensions and structural properties were measured and evaluated after ten washing cycles and then flat dried. The results show that the weight per unit area, thickness, air permeability and dimensional stability values are independent of the yarn linear density, fabric structure and fabric density. Statistically evaluated using Design Expert Analysis of variance (ANOVA) software 6.06., test results show that dimensional stability is mostly effective for the bursting strength, air permeability and fabric weight per unit area.
Authors and Affiliations
Ebru Çoruh
Keywords
Related Articles
- EP ID EP208531
- DOI 10.5604/01.3001.0010.2667
- Views 88
- Downloads 0
Opracowanie metody dla charakteryzacji długości węglowych włókien ciętych o dużej długości
Dla wytwarzania kompozytów ze wzmocnieniem włókien węglowych bardzo ważna jest znajomość rozkładu długości tych włókien. Niestety, jak dotychczas nie istniały odpowiednie metody pomiarowe pozwalające charakteryzować włók...
Antimicrobial Activity of Coleus Ambonicus Herbal Finish on Cotton Fabric
An extract obtained from Coleus Ambonicus was applied on cotton fabric by means of the exhaust, micro encapsulation and nano encapsulation methods, and the antimicrobial activity of the finished fabric assessed quantitat...
Opracowanie metody tkania dla wytworzenia przestrzennych dwuwarstwowych innowacyjnych struktur lnianych tkanin
W artykule opisano wprowadzenie i wyczerpującą analizę dwóch metod tkania przeznaczonych dla tkania lnianych tkanin o innowacyjnej strukturze przy zastosowaniu nowoczesnych skomputeryzowanych krosien różnego typu. Przewi...
Effects of Filament Linear Density on the Comfort Related Properties of Polyester Knitted Fabrics
One of the most important developments seen in the synthetic fibre industry is absolutely producing microfibres. Microfibres provide many distinguishing properties for different end uses. In this study, the effects of fi...
Design of Lightweight Composite Disks Reinforced with Continuous Fibres
The paper presents the results of an investigation in the area of numerical analysis and designing of lightweight composite disks reinforced with continuous fibres. The problem of the optimal layout of reinforcing fibres...