Enhanced organic solar cell performance: Multiple surface plasmon resonance and incorporation of silver nanodisks into a grating-structure electrode
Journal Title: Opto-Electronic Advances - Year 2019, Vol 2, Issue 7
Abstract
In this study, plasmonic nanostructures were examined to enhance the light harvesting of organic thin-film solar cells (OSCs) by multiple surface plasmon resonance (SPR) phenomena originating from the grating-coupled configuration with a Blu-ray Disc recordable (BD-R)-imprinted aluminum (Al) grating structure and the incorporation of a series of silver nanodisks (Ag NDs). The devices with such a configuration maximize the light utilization inside OSCs via light absorption, light scattering, and trapping via multiple surface plasmon resonances. Different types and sizes of metallic nanoparticles (NPs), i.e., gold nanoparticles (Au NPs), Ag nanospheres (Ag NSs), and Ag NDs, were used, which were blended separately in a PEDOT:PSS hole transport layer (HTL). The device structure comprised of grating-imprinted-Al/P3HT:PCBM/Ag ND:PEDOT:PSS/ITO. Results obtained from the J–V curves revealed that the power conversion efficiency (PCE) of grating-structured Al/P3HT:PCBM/PEDOT:PSS/ITO is 3.16%; this value is ~6% higher than that of a flat substrate. On the other hand, devices with flat Al and incorporated Au NPs, Ag NSs, or Ag NDs in the HTL exhibited PCEs ranging from 3.15% to 3.37%. Furthermore, OSCs with an Al grating substrate were developed by the incorporation of the Ag ND series into the PEDOT:PSS layer. Compared with that of a reference device, the PCEs of the devices increased to 3.32%–3.59% (11%–20% improvement), indicating that the light absorption enhancement at the active layer corresponds to the grating-coupled surface plasmon resonance and localized surface plasmon resonance excitations with strong near-field distributions penetrating into the active layer leading to higher efficiencies and subsequent better current generation.
Authors and Affiliations
Thitirat Putnin, Chutiparn Lertvachirapaiboon, Ryousuke Ishikawa, Kazunari Shinbo, Keizo Kato, Sanong Ekgasit, Kontad Ounnunkad*, Akira Baba*
Keywords
Related Articles
- EP ID EP683111
- DOI 10.29026/oea.2019.190010
- Views 152
- Downloads 0
True random coded photon counting Lidar
A true random coded photon counting Lidar system is proposed in this paper, in which a single photon detector acts as the true random sequence signal generator instead of the traditional function generator. Compared with...
Scanning cathodoluminescence microscopy: applications in semiconductor and metallic nanostructures
Cathodoluminescence (CL) as a radiative light produced by an electron beam exciting a luminescent material, has been widely used in imaging and spectroscopic detection of semiconductor, mineral and biological samples wit...
Helicity-dependent THz emission induced by ultrafast spin photocurrent in nodal-line semimetal candidate Mg3Bi2
Helicity-dependent ultrafast spin current generated by circularly polarized photons in topological materials holds the crux to many technological improvements, such as quantum communications, on-chip communication proces...
Movable electrowetting optofluidic lens for optical axial scanning in microscopy
Optical axial scanning is essential process to obtain 3D information of biological specimens. To realize optical axial scanning without moving, the tunable lens is a solution. However, the conventional tunable lenses usu...
Silicon photonics for telecom and data-com applications
In recent decades, silicon photonics has attracted much attention in telecom and data-com areas. Constituted of high refractive-index contrast waveguides on silicon-on-insulator (SOI), a variety of integrated photonic pa...