Estimation Model of the Total Number of Work Cycles at a Press
Journal Title: RECENT - Year 2014, Vol 15, Issue 42
Abstract
In the case of a machine tool, but not only, it is justified to take into consideration the energetic and material consumption corresponding to the whole usable lifetime of it. Relevant are the stages of implementation (execution) and use (operation), but it is also worth to give proper attention to the stages of design and post-use of the machine. If the material consumption excess to achieve the frame is relatively easy to estimate, for the operating energetic consumption, dependent on the total number of work cycles of the press over its usable lifetime and on the level of application appropriate to each work cycle, in the literature, there has not been identified a suitable model yet. This paper presents a model for evaluation of the total number of work cycles for a press, this being absolutely necessary to the evaluation of operational energy consumption.
Authors and Affiliations
Romeo CIOARĂ, Ioan DAN
Keywords
Related Articles
- EP ID EP99897
- DOI -
- Views 77
- Downloads 0
The Macroscopic Analysis of Samples Cut With a CO2 Laser Type TC L4003
In industrial practice, metal materials such as steel, tool steel, stainless steel, aluminium and aluminium alloys are cut using laser (considered an allied welding process). But laser can also cut materials such as tita...
Analyzing the Real Area of Contact Wear Using ANOVA
Austempering is a relatively new treatment in the field of ductile iron casting. This heat treatment was found to improve the ductile irons at high levels of strength, rendering ductile iron castings superior to steel fo...
Drive with Rotative Speed Independent from the Engine of the Pressure Wave Compressors
With a view to achieving internal combustion engines as economical and less polluting as possible, in this paper a new configuration for the driving system of the pressure wave supercharging compressors is submitted. A n...
Convergence of Sustainable Economic Development in European Union
This paper is especially focused on Romanian economic sustainable development case and represents a part of the author’s preoccupations: convergence inside European Union. The nature of current research is conceptual, me...
Management of Manufacturing Systems’ Adapting and Dynamic State Times
This paper contains a checking of the times consumed on the manufacturing flow. Operational, auxiliary, adapting and dynamic regime times, for different manufacturing tasks and organizational types are pointed out and ca...