Evaluation of protective properties of concretes made of cements with calcareous fly ash with respect to reinforcing steel
Journal Title: Roads and Bridges - Drogi i Mosty - Year 2013, Vol 12, Issue 2
Abstract
The studies on the protective properties of concrete made of cements containing calcareous fly ash are presented in the paper. The aim of the studies carried out by electrochemical methods was to determine the susceptibility of reinforcing steel corrosion, protected by the analysed concretes, as well as to define the rate of reinforcement corrosion installed in the loaded and cracked samples, subjected additionally to the action of chloride solution. The obtained results were compared with the values of Portland cement concrete, considered as reference. The results showed that the addition of up to 50% calcareous fly ash do not reduce the protective properties of concretes with respect to reinforcing steel, while the use of fly ash together with blast furnace slag leads to the deterioration of reinforcement.
Authors and Affiliations
Andrzej Śliwka, Katarzyna Domagała, Adam Zybura
Keywords
Related Articles
- EP ID EP69480
- DOI 10.7409/rabdim.013.017
- Views 126
- Downloads 0
Identyfikacja jednorodnych odcinków konstrukcji nawierzchni
W trakcie pomiarów FWD bardzo często dochodzi do sytuacji, w której pomierzone przemieszczenia pionowe różnią się od siebie w sposób znaczący. Te, które bardzo od siebie odbiegają (będące podstawą późniejszej identyfikac...
Properties of numerical solution of the deformation and stability problem in shallow conical shells under external pressure
The paper presents an analysis of a numerical solution in the ANSYS software to three problems related to determination of deformations and stability of closed shallow conical shells under external pressure: 1) linear (b...
Properties of concrete impregnated using epoxy composition
Surface waterproofing of concrete elements of roads and bridges allows a reduction of penetration of gasses and liquids and hence prevention of concrete deterioration. The main subject of this study is the influence of p...
Wybrane cechy numerycznych modeli MES w analizie odwrotnej konstrukcji nawierzchni jezdni
Biorąc pod uwagę kluczowe parametry modelu nawierzchni jezdni, opartego na metodzie elementów skończonych (MES), takie jak rodzaj, kształt siatki elementów skończonych, warunki brzegowe oraz wymiary modelu nawierzchni, p...
Comparative analysis of properties of Bürgers’, Boguslavskis’ and Zener’s materials in view of tests of stress and strain in reference to properties of asphalt mixes
In the paper a comparative analysis of behaviour and properties of Bürgers’, Boguslavskis’ and Zener’s materials is presented. The analysis is based on results of a series of tests of one-dimensional stress-strain relati...