Evaluation of stress intensity factor of multiple inclined cracks under biaxial loading
Journal Title: Frattura ed Integrità Strutturale - Year 2012, Vol 6, Issue 22
Abstract
A finite rectangular plate of unit thickness with two inclined cracks (parallel and non parallel) under biaxial mixed mode condition are modelled using finite element method. The finite element method is used for determination of stress intensity factors by ANYSIS software. Effects of crack inclination angle on stress intensity factors for two parallel and non parallel cracks are investigated. The significant effects of different crack inclination parameters on stress intensity factors are seen for lower and upper crack in two inclined crack. The present method is validated by comparing the results from available experimental data obtained by photo elastic method in same condition.
Authors and Affiliations
R. K. Bhagat, V. K. Singh, P. C. Gope, A. K. Chaudhary
Keywords
Related Articles
- EP ID EP92797
- DOI 10.3221/IGF-ESIS.22.01
- Views 76
- Downloads 0
Graphene as a model system for 2D fracture behavior of perfect and defective solids
A 2D bond-breaking model is presented that allows the extraction of the intrinsic line or edge energy, fracture toughness, and strain energy release rate of graphene from measured and calculated 2D Young’s mo...
Extension of the CJP model to mixed mode I and mode II
The present authors have previously proposed a novel ‘plastic inclusion’ approach for dealing with the local plasticity which occurs at the tip of a growing fatigue crack. This meso-scale model provides a mod...
Crack initiation and propagation paths in small diameter FSW 6082-T6 aluminium tubes under fatigue loading
This paper reports results of fatigue tests of friction stir welded (FSW) aluminium tubes. Relatively small 38 mm diameter tubes were used and hence an automated FSW process using a retracting tool was design...
Previsione della resistenza a fatica in saldature per punti attraverso modellazione solida
Nel presente lavoro vengono messi a confronto due metodi idonei per la verifica di giunzioni saldate per punti: il metodo del raggio di raccordo fittizio ed il metodo del gradiente implicito. Il primo impone un raggio di...
Geometric numerical integrators based on the Magnus expansion inbifurcation problems for non-linear elastic solids
We illustrate a procedure based on the Magnus expansion for studying mechanical problems whichlead to non-autonomous systems of linear ODE’s. The effectiveness of the Magnus method is enlighten by theanalysis of a...