Experimental Investigation on Characteristics of Polythene Waste Incorporated Concrete
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2014, Vol 10, Issue 7
Abstract
The Disposal of large quantity of plastic cover may cause pollution of land, water bodies and air. The proposed concrete which is made up by adding plastic in concrete may help to reuse the plastic cover as one of the constituent’s material of concrete, to improve the certain properties of concrete. The properties of concrete as varying percentages of plastic will test for compressive strength and Split tensile strength and flexural strength shows that an appreciable improvement in tensile strength of concrete can be achieved by introducing cut pieces of plastic cover. This paper presents the experimental investigation of feasibility of polythene cover post consumer waste used for food packaging. The numbers of samples is prepared in M25 concrete mix with required water/ cement ratio. Plastic waste was converted in to fiber size form and added waste for three aspect ratios, is casted into desire shape and size as per requirement of the tests. Each specimen was cured for 7 days, 14 days, and 28 days. The workability of compression, tension and flexural tests were carried out. The results are compared with normal concrete was observed.
Authors and Affiliations
J. Simson Jose , Mr. M. Balasubramanian
Defect Detection in Alloy Steel Surface Using Nonsubsampled Contourlet Transform
Surface defect detection of metallic surfaces is a major challenge in any manufacturing industry. In this paper, an automated system to classify alloy steel surface based on Nonsubsampled Contourlet Transform (NSCT) is p...
Optimizing the Cost for Resource Subscription Policy in IaaS Cloud
Cloud computing allow the users to efficiently and dynamically provision computing resource to meet their IT needs. Cloud Provider offers two subscription plan to the customer namely reservation and on-demand. The reserv...
Cascaded Multilevel Inverter with PWM Control Method
A hybrid cascaded multilevel inverter with PWM method is presented in this paper. It consists of a standard 3-leg inverter (one leg for each phase) and Hbridge in series with each inverter leg. It can use only a...
Cryptography in Ultra-Low Power Microcontroller MSP430
This article describes an implementation for the method from Texas Instruments for a random number generator in the ultra-low power microcontroller MSP430x5xx Families and the analysis of this generator in the concrete m...
ACCIDENT AVOIDANCE AND DETECTION ON HIGHWAYS
Technological approaches for detecting and monitoring fatigue levels of driver fatigue continue to emerge and many are now in the development, validation testing, or early implementation stages. Previous studie...