Experimental Studies on Concrete with Bentonite as Mineral Admixture
Journal Title: GRD Journal for Engineering - Year 2016, Vol 1, Issue 2
Abstract
The present investigation deals with effect of bentonite clay on concrete. The concrete was produced by partial replacement of OPC with mineral admixture bentonite clay in percentages of 0%, 5%, 10%, 15% and 20%. The M20 grade of concrete was designed. The compressive strength, split tensile strength and flexural strength were found for the specimens. The present investigation is to study the effect of bentonite clay on concrete. The results indicate that the concrete with 5% Bentonite Clay replacement shows better performance when compared to other samples. The compressive strength, split tensile strength and flexural strength at 5% bentonite clay replacement and it was less for the remaining samples.
Harmonic Drive Design & Application: A Review
This manuscript investigates research done in the field of harmonic drives. A brief synopsis of papers dealing with material analysis, optimized design parameters for harmonic drive are presented. Another research work i...
Design & Modeling of Automatic Phase Changer
Automation plays a predominant role in the modern scientific world. Automatic phase changer finds application in small offices, residences where single phase equipments are used during phase failure, this unit automatica...
Camera Shake Removal using Weighted Fourier Burst Accumulation and NLmeans Denoising
Taking photos under dim lighting conditions using a hand-held camera is very challenging. If the camera is set to a large exposure time, the image is blurred due to camera shake. On the other hand, if it is taken with a...
Trends and Variability of Climatic Parameters in Vadodara District
Climate change may refer to a change in average weather conditions, or in the time variation of weather around longer-term average conditions. The impact of climate change on the various meteorological parameters has rec...
Workability & Rheological Parameter of Concrete
The present methods available for determining these properties of fresh concrete are operator sensitive and thus, the properties for same mix of concrete made under same conditions will vary depending upon the workmanshi...