Exterior Scaffolds of Prefabricated Components, Loads Affecting Scaffolds and Scaffold Experiments
Journal Title: International Scientific and Vocational Studies Journal - Year 2018, Vol 2, Issue 2
Abstract
In the construction sector, constructions, painting, heat insulation, coating and so on. Outside facade scaffoldings are widely used in outdoor facade applications. The floats consist of temporary elements which are designed to support various loads in the constructions and to provide convenience for the applications made on the exterior sides of the constructions. In this study, exterior scaffold components consisting of prefabricated components and classification of scaffolds according to the purpose of use are included. Furthermore, since pre-fabricated steel and aluminum alloy components used in exterior scaffold installation need to be designed and installed in a capacity that can withstand all kinds of loads statically and dynamically with respect to environmental impacts, what is required of the test works related to testing of the prefabricated components against loads and external influences exposed in the site environment before they are used in the sites. In 2017, a company that manufactures prefabricated steel exterior scaffolding in Elmadağ district of Ankara has examined the tests that should be done at the production site in accordance with the TS EN 12810-1 Scaffolding certification. Experiments that the laboratory has been done in laboratory have also been examined according to the requirements of TS EN 12810-1 standard. In the conclusion part of the work, the importance of external scaffolding in terms of occupational health and safety has been explained instead of the external scaffoldings which are laid out with the inadequate components required by the standards without the engineering.
Authors and Affiliations
Mustafa Yaşar, Salih Yazıcıoğlu
Keywords
Related Articles
- EP ID EP35726
- DOI -
- Views 346
- Downloads 0
The Mesozoic Stratigraphy and Ammonite Faune for Niksar-Erbaa (Tokat) Territory
The basement of the study territory covering the Niksar-Erbaa territories and their immediate vicinity, located on the north and above the North Anatolian Fault, forms the rocks belonging to Permo-Triassic aged Karakaya...
Interlock Optimization Of An Accelerator Using Genetic Algorithm
Accelerators are systems where high-tech experiments are conducted today and contain high-tech constructions. Construction and operation of accelerators require multidisciplinary studies. Each accelerator structure has i...
Elastic Analysis of an Hollow Cylinder Made from Functionally Graded Material Exposed to Internal Pressure
This study relates to the determination of radial and tangential stresses and radial displacements in a hollow cylinder made of functional graded material (FGM) subject to internal pressure both analytically and using A...
Optimization of Polyethylene Inserts Design Geometry of Total Knee Prosthesis
Knee prostheses are produced from biomaterials which are compatible with human body as a result of damage of cartilage tissue due to various health problems. These prostheses consist of polyethylene parts between the Tib...
Determination of Biomass Potential and Energy Values of Walnut (Juglans regia L.) Wastes: Case of Tokat Province
Biogas energy is an important energy type in terms of both the advantages it provides during the use phase and the source of raw materials in our country compared to other renewable energy sources. In our country, it is...