Fabrication And Analsys Of Metal Cutting Chop Saw

Abstract

A chop saw is a power tool used to make accurate cuts in wood, plastic, and metals. It has a fixed blade, attached to a moving arm that spins over a small worktable. Chop saws are used to create a rough, initial abrasive cut in a desired material. In principle, a chop saw is an electrically powered motor which turns a high speed abrasive wheel. Wide variety of parts can be machined by using this chop saw. The chop saw can make an initial straight, abrasive cut in a material to either make the piece of better workable size or to create a rough outline of a desired shape. The chop saw is used in the initial stages of a project because of the draft quality present in it’s work. Normally A straight cross cut is made with the chop saw table set at the 0° position. We are going to introduce two new systems in this Chop Saw housing. They are Spring loaded pedal system Coolant system By providing spring loaded pedal system we can increase cutting force on work piece and it results in faster cutting, also can obtain additional support. Coolant system reduces the heat developed at work-tool interface, residual stresses on the work piece and also decreases wear in the abrasive wheel. By introducing these additional features the performance and reliability of the machine can be improved. And also we are going to analyze the cutting forces acting on the work and the tool.

Authors and Affiliations

H. Sumithra, K. Madhurima

Keywords

Related Articles

Innovative Use of Quartzite Rock Dust and Effect of Glass Fibers in Rigid Pavements

In the current investigation sand is replaced by quartzite rock dust from locally available sources. Sand is replaced by quartzite rock dust up to 70% by weight of sand in steps of 10% increments and 0.2% glass fibers b...

Design of web-based information systems– New challenges for systems development

The web-technology is going through major changes these years, both with respect to types of systems based on webtechnology, organization of the development work, required approaches and competencies, etc. We must rethin...

Introduction and Parametric Analysis of Air Bearings

Bearing technology represents one of the age old challenges for mechanical engineers. Plain bearings and rolling bearings have been pushed to their limits in applications like electric motors and high resolution scannin...

Experimental Investigation of Heat Transfer and Fluid Flow Characteristics Using S-shape Inserts through Circular Tube in Turbulent Zone

The performance of force convection heat transfer in tubes can be improved by use of inserts. This leads to fluid mixing and redevelopment of thermal boundary layer with resulting enhancement in heat transfer. In presen...

Evaluation and Analysis of Road Traffic Noise on a National Highway

Noise pollution has been well recognized as one of the major cause of concern that impacts the quality of life in urban areas across the globe. Traffic noise from highways creates problems in the surrounding areas spec...

Download PDF file
  • EP ID EP22399
  • DOI -
  • Views 221
  • Downloads 5

How To Cite

H. Sumithra, K. Madhurima (2016). Fabrication And Analsys Of Metal Cutting Chop Saw. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 4(7), -. https://www.europub.co.uk/articles/-A-22399