FEA Analysis and Optimization of Two-Wheeler Bike Mono Suspension System
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 2
Abstract
Most of the Indian roads are pathetic in nature and 2 wheelers are the worst hit of this. So it is very essential to have a very good suspension system for the 2 wheeler to avoid accidents and improve the ride quality The modern motorcycle uses suspension to accomplish several things it provides a smooth comfortable ride absorbing bumps and imperfections in the road. This paper deals with analysis of mono suspension spring by using FE approach. Considering the highest level safety and ride control by shock waves and dissipated kinetic energy some concepts were built in mono shock absorbers and later they compared with the existing functioning systems adopted in the 2 wheeler. 3 concepts were developed where considering in starting helical spring alone and then hydraulic damping, gas damping systems were built to achieve the best 0.8 damping ratio for mono suspension system. Starting with single helical spring only suspension later advanced hydraulic with gas accumulator is studied in detail. Maximum damping value of 0.8 is achieved with combined spring, hydraulic and has accumulator design concept. Response curve is plotted against dynamic loads and three different loads 200 Kg, 250 Kg and 300 Kg is studied.
Authors and Affiliations
Amaresh Kumar D, Atmanand Anikivi, Shridhar Deshpande
Keywords
Related Articles
- EP ID EP579840
- DOI 10.24247/ijmperdapr201911
- Views 87
- Downloads 0
Design and Simulation of Double Wishbone (SLA) Suspension Geometry
Widely all the incoming new era of the cars uses short and long arm dual wishbone suspension geometry system, due to its ability to perform individually without affecting the other wheel of suspension system and also to...
ANALYSIS OF INCREMENTAL SHEET FORMING PROCESS THROUGH SIMULATION
Incremental sheet forming (ISF) process is a flexible manufacturing process to produce complex 3D products at reasonable manufacturing cost. An advantage of ISF is the improved formability than traditional sheet forming...
ANALYSIS OF A PART USING DYNAMIC SIMULATION AND REAL TIME EXPERIMENTS IN PART FEEDERS
In the modern industrial world, agility in manufacturing and assembly line is the key for improving the productivity. Segregation and feeding of parts in assembly line is important for reducing the manufacturing lead tim...
Test Section Blockage Corrections for Subsonic Open-Circuit Wind Tunnel
By their very nature, even the most perfect wind tunnels cannot produce an unconstrained flow past a model. The problem of blockage in the test section has been of concern to experimentalists and theoreticians in the stu...
CFD ANALYSIS OF HUMAN POWERED SUBMARINE TO MINIMIZE DRAG
This paper deals with finding the optimum fineness ratio, i.e. ratio of length to maximum diameter, of human -powered submarine of different shapes to reduce the drag force on the body using Computational Fluid Dynamics...