FINITE ELEMENT ANALYSIS AND FATIGUE ANALYSIS OF SPUR GEAR UNDER RANDOM LOADING
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 4, Issue 6
Abstract
Every component or structure is designed based on factor of safety. Which means the component should not fail below the design load. But in actual arena it is not so. There is a need for an analysis which predicts the life of the component. This requirement is satisfied by Fatigue analysis. It takes all types of loads i.e., static loads, random loads varying with time and gives life of the component as output. Present analysis is one such analysis of carrying fatigue test on spur gear using software package ANSYS.The gear fitted in the gearbox of armored tracked vehicle is vulnerable to considerable fatigue damage over its life period due to the dynamic excitations caused by the terrain undulations, the rotating wheel and track assemblies. For this purpose, initially static analysis of the model was carried out to validate the model and the boundary conditions correctness. Further Modal analysis is carried out to determine the dynamic characteristics of the gear model. The present work deals with the calculation of static and dynamic analysis, and fatigue life estimation of test gear, which is contacting master gear and assuming loading on the gear is random or constant amplitude by Finite Element package ANSYS. Initially gear system is modeled in CATIA V5 later it is imported into ANSYS for further analysis.
Authors and Affiliations
Shaik Gulam Abdul Hasan , Ganoju Sravan Kumar
Keywords
Related Articles
- EP ID EP100645
- DOI -
- Views 111
- Downloads 0
An Evolutionary Study of Software Matrices for Object Oriented Products
Increase in the use of technology leads in the development of much new software. As soft ware development is a complex process, it is difficult to measure the software qualities and quantities. To measure the qual...
EVALUATION OF ANALYTICAL MODELS FOR PREDICTION OF HEIGHT OF CAPILLARY RISE FROM WATER TABLE IN DIFFERENT POROUS MEDIA
The prediction of the capillary rise height in the unsaturated porous media above the water table is important in hydrology, water management, contaminant transport and geotechnical engineering studies. The heights of t...
Evaluation and Performance Analysis of Machine Learning Algorithms
Prediction is widely researched area in data mining domain due to its applications. There are many traditional quantitative forecasting techniques, such as ARIMA, exponential smoothing, etc. which achieved higher succe...
DIFFERENTIATION, USE AND APPLICATION OF SHELL ELEMENTS, MEMBRANE ELEMENTS, THICK SHELLELEMENTS IN CASE OF HIGHRISE BUILDINGS
This paper present the usage of shell and membrane elements are studied in high rise buildings using latest software ETABS 2013 .using this software results are compared between shell elements and membrane element...
SELECTION OF TEST METHOD TO QUANTIFY WORKABILITY OF CEMENT PASTE AND MORTAR FOR VERY LOW WORKABLE TO HIGH WORKABLE MIX
Cement paste and mortar fresh properties governs concrete characteristics.Selection of test method to measure workability is based on mix characteristic. Very low workability mix test method differs from the high workab...