FORMAL DEFINITION AND PROPERTIES OF FEB-BASED ENOB OF INTELLIGENT CYCLIC ADC

Journal Title: Metrology and Measurement Systems - Year 2008, Vol 15, Issue 3

Abstract

The paper presents a new approach to the measurement of effective resolution (effective number of bits - ENOB) of the cyclic A/D converters (CADCs). The core idea of the approach is a direct measurement of ENOB using, as a numerical measure, the number of true bits before the first erroneous bit (FEB) in the code of the sample. The position of FEB is determined by the first non-zero bit in the binary presentation of the conversion error. The FEB-based definition of ENOB is introduced and discussed. The results of simulation evaluations of FEB distributions in sequential cycles of conversion are presented and values of FEB-based ENOB are compared with the conventional ENOB evaluations. The influence of DNL and INL errors of internal A/D converter on directly and conventionally measured values of ENOB is analysed. The proposed method of ENOB measurement is less dependent on the class of the testing signal and can be used for more adequate assessment of actual ADC resolution.

Authors and Affiliations

ANATOLIY PLATONOV, ŁUKASZ MAŁKIEWICZ, KONRAD JĘDRZEJEWSKI

Keywords

Related Articles

CHARGE-DENSITY-WAV FEATURES IN TUNNEL SPECTRA OF HIGH-T SUPERCONDUCTORS

Tunnel conductance G(V) was calculated for junctions between a normal metal and a spatially inhomogeneous superconductor with a dielectric gap on the nested sections of the Fermi surface or between two such superconducto...

THE POROACCESSIBILITY PARAMETERS FOR THREE-DIMENSIONAL CHARACTERIZATION OF ORTHOPAEDIC IMPLANTS POROUS COATINGS<br />

The ability of formation of the proper bone-porous implant fixation depends, among others, on the structural-osteoinductive properties of the porous coating covering the orthopaedic implant surface. These properties, des...

STABILIZED TEMPERATURE MEASUREMENTS BASED ON THERMOOPTIC MEMORY PHENOMENA

Investigations of non-linear phenomena in A2MX4 (where: A - organic cation or ion of alkaline metal, M - metal, X - halogen) crystals with incommensurate phases are very interesting both from scientific and practical poi...

DIAGNOSIS OF THE OPERATIONAL STATUS OF ELECTROMECHANICAL DEVICES WITH AN OPTICAL FIBER VIBRATION SENSOR

In the presented paper a prototype of an optical fiber vibration sensor is described as a tool for diagnosis of machines and electromechanical devices. The application of the optical fiber as a sensor allowed a design of...

INTRODUCTION TO THE T AND CHI-SQUARE DISTRIBUTION FOR A MORE ACCURATE EVALUATION OF THE MEASURE OF THE WORD ERROR RATE IN ANALOGTO-DIGITAL CONVERTERS<br />

The word error rate (WER) in an Analog to Digital Converter (ADC) is the probability of receiving an erroneous code for an input, after correction is made for gain, offset, and nonlinearity errors, and a specified allowa...

Download PDF file
  • EP ID EP139373
  • DOI -
  • Views 80
  • Downloads 0

How To Cite

ANATOLIY PLATONOV, ŁUKASZ MAŁKIEWICZ, KONRAD JĘDRZEJEWSKI (2008). FORMAL DEFINITION AND PROPERTIES OF FEB-BASED ENOB OF INTELLIGENT CYCLIC ADC. Metrology and Measurement Systems, 15(3), 267-280. https://www.europub.co.uk/articles/-A-139373