Frictional Characteristics of Cotton-Modal Yarns
Journal Title: Fibres and Textiles in Eastern Europe - Year 2018, Vol 26, Issue 3
Abstract
In this study, structural or physical properties such as the unevenness, hairiness and frictional properties of cotton-modal blended yarns were studied. For this purpose, 100% cotton, 50% cotton/modal and 100% modal ring spun yarns were produced in five different twist coefficients (αe: 3.5, 3.7, 4.0, 4.2, 4.5) and four different yarn linear densities (21, 25, 30 and 37 tex). General factorial design was used and the response surface was plotted for analysing the data. In conclusion, the most influential factors for the yarn characteristics were the yarn linear density and blend ratio. Contrary to expectations, the twist coefficient factor had a minor effect on yarn characteristics, especially on the friction coefficient.<br/><br/>
Authors and Affiliations
Oğuz Demi̇ryürek, Ayça Kılıç
Keywords
Related Articles
- EP ID EP345281
- DOI 10.5604/01.3001.0011.7301
- Views 91
- Downloads 0
Porównanie dwóch różnych sposobów rekonstrukcji 3D płaskich wyrobów włókienniczych
Artykuł porównuje wydajność dwóch metod rekonstrukcji 3D powierzchni płaskich struktur włókienniczych posiadających defekty. Wydajność oceniano biorąc pod uwagę jako kryterium dokładność scharakteryzowania uszkodzeń tkan...
Multichannel Optical System for the Quality Control of Digital Printing
Economical efficiency and environmental protection are key elements of modern textile treatment, where chemical fluids are digitally assigned to designated places in a printinglike process. Except arbitrarily designed co...
Preparation of Copper Sulfide Deposition on Modified Poly(Ethylene Terephtalate) Fibres with Good Conductivity
The immobilization of CuS on the surface of poly (ethylene terephtalate) (PET) fibres was carried out by the functionalization of PET fibres with chitosan (CS), followed by the chemical deposition method. Crosslinked chi...
Granulation Process of Waste Tanning Shavings
sdsddsd<br/><br/>
Fabrication of Pure Electrospun Materials from Hyaluronic Acid
The aim of the research was to develop optimal conditions for manufacturing materials based on hyaluronic acid by the electrospun method. The studies were composed of three stages: the process of selection of the optimal...