Influence of Atmospheric Conditions on the Mechanical Properties of Pet Rubber Composites
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2005, Vol 28, Issue 2
Abstract
The aim of paper is to study the influence of environmental open air conditions on the PET-rubber composites. Two set of samples (Type I, Type II) were obtained with the same composition, but the composites of Type I are random mixed while Type II are layered. These samples were obtained by compression molding for 45 minutes, working in a temperature domain of 180 °C-260 °C. The samples were left free in atmospheric conditions (at temperature between 3 °C- 30 °C, under sun light and rain) for two months. These samples were mechanicaly tested and aging was evaluated.
Authors and Affiliations
Cristina VLADUTA, Anca DUTA
Keywords
Related Articles
- EP ID EP664220
- DOI -
- Views 79
- Downloads 0
The Influence of Different Coatings on the Graphite Degeneration in the Superficial Layer of the Iron Castings
The main objective of this experimenal reserch is to investigate new possibilities for reducing the graphite degeneration phenomenon in the superficial layer of iron castings. For the experiment, a spheroidal graphite ca...
Elements of Drawing Theory and Technology of the High Mechanical Strength Wires in Ultrasonic Field
In the paper are presented elements of drawing theory and technology of the high mechanical strength wires, when the auger die is located in the maximum of the waves oscillation and it is activated on drawing direction....
Half-Finished Technology of Steels and Fatigue Strength
The paper presents the bending fatigue testing for four steel brands. The test showed that the fatigue strength is decreasing with the increasing of both ingot size and the rolled sheet thickness. The fatigue strength is...
Increase the Steels Purity Cast in Vacuum
The need to develop products with special characteristics and high mechanical properties led to the introduction of plastic deformation of semifinished materials. Special purpose products are produced from slabs, blooms...
The Influence of the Thermomagnetic Treatments on the Hardness Number of Steels and the Superficial Layers Nitrided Durability
Two types of steels subjected to a nitriding thermo-chemical treatment after thermomagnetic treatments. The structural aspects into superficial layer of these steels are studied during friction process by using of an Ams...