Influence of rapid solidification and lithium additions on microstructure and mechanical properties of aluminum based alloys

Journal Title: JOURNAL OF ADVANCES IN PHYSICS - Year 2016, Vol 12, Issue 4

Abstract

A series of aluminum-lithium or lightweight alloys containing up to 5 wt. % lithium was rapidly solidified from melt by chillblock melt-spun technique. The resultant ribbons were studied by X-ray diffraction (XRD), scanning electron microscope (SEM) and deferential scanning calorimetry (DSC) techniques. The results showed that the structures of all melt-spun ribbons were completely composed of two distinct phases aluminum rich phase and intermetallic compound (IMC) Al9.8- Li1.1phase. It is also found that melting point, solidus and liquidus temperatures of the lightweight alloys are lowered as the Li content is increased. Additionally, elastic moduli, internal friction, thermal diffusivity and hardness measurements of melt-spun ribbons were examined by using dynamic resonance method and Vickers indenter for one applied load of 25 grams of force for 5, 20, 40, 60, 80 and 99 seconds. Results interpreted in terms of the phase changes occurring in the alloy system. With the addition of Li, the Al rich phase is finer in grain size, and intermetallic compound is more uniformly distributed. As a result, Young's modulus and micro-hardness of Lightweight are increased when Li is added into the Alalloy. The aim of the research planned in this work was to design the A1-Li family of alloys contribute to their increasingly broad application in aeronautics, as an alternative for the aluminum alloys, which have been used so far.

Authors and Affiliations

Rizk Mostafa Shalaby, Mustafa Kamal, Adel. Saleh Waqlan

Keywords

Related Articles

Law of gravity

This essay introduces a realistic look at our laws of gravity, and the effects thereof, and it goes beyond to reveal how and by what gravity comes about in the fundamentals of nature upon which the earth and all spheres...

Radiological Mapping of Al-Dabaa Site at Low Depth Profile for Evaluation its Suitability for Disposal of Radioactive Wastes

Disposal sites use series of natural and engineered barriers to contain either radioactive wastes and or spent nuclear fuel. Migration of radionuclide and their pathways studies are carried out as selection criteria of r...

Evaluation of Calculation Algorithms for photon Beam dose in Heterogeneous Medium

The success of the implementations of a radiotherapy treatment planning system is determined by the ability of the dose calculation algorithms to reproduce the algorithm input data, and in most cases the agreement was fo...

Yang-Mills Families

The Yang-Mills theory structure is based on group theory. It rules the symmetry relationship where the number of potential fields transforming under a same group must be equal to the number of group generators. It define...

Structural, Optical and Magnetic Investigation of Ni, Co and Mn doped SnO2 Nano particles Synthesized by Chemical Co-precipitation.

Pure and transition metal dopednano-crystalline Sn1-xTMxO2 (x = 0.0, 0.05, TM = Ni, Co and Mn)were synthesized in aqueous solution by chemical Co-precipitation technique. X- ray diffraction (XRD), high resolution transmi...

Download PDF file
  • EP ID EP653315
  • DOI 10.24297/jap.v12i4.4425
  • Views 62
  • Downloads 0

How To Cite

Rizk Mostafa Shalaby, Mustafa Kamal, Adel. Saleh Waqlan (2016). Influence of rapid solidification and lithium additions on microstructure and mechanical properties of aluminum based alloys. JOURNAL OF ADVANCES IN PHYSICS, 12(4), 4440-4450. https://www.europub.co.uk/articles/-A-653315