Influence of the thermal factor on the composition of electronbeam highentropy ALTiVCrNbMo coatings
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 12
Abstract
<p>This paper reports results of studying the element and phase compositions of electron-beam coatings based on the high-entropy alloy AlTiVCrNbMo, depending on the deposition temperature (in the range of 300...700 °С).</p><p>The high-entropy alloys were melted in an arc furnace in an atmosphere of high-purity argon. Vacuum condensates of the high-entropy alloy (AlTiVCrNbMo) with a thickness of 3–5 µm were obtained in the vacuum setup UVN-2M-1 at a working vacuum of 5·10<sup>-5 </sup>mТоrr. The alloy evaporation was performed from the water-cooled ingot mold using an electron-beam gun with a power of 5 kW. Condensation of vapors of all the elements of the alloy was performed onto copper substrates at temperatures of 300, 500, 700 °C.</p><p>Based on analysis of the element composition of materials of the target made of the high-entropy six-element alloy AlTiVCrNbMo and electron-beam coatings, based on it, we established the critical parameter (specific heat of vaporization of an element) that defined a selective change in the element composition. In accordance with a characteristic change in the composition of coatings of the multi-element high-entropy alloy, 3 groups of elements were distinguished: with a specific heat of evaporation of 280...350 kJ/mol (group 1), 420…460 kJ/mol (group 2), and 590…680 kJ/mol (group 3). It was shown that the formation of a single-phase coating of the high-entropy alloy (based on BCC of the crystalline lattice) occurs at the higher deposition temperature of 500...700 °C when the coating consists of not less than 5 elements.</p><p>It was established that based on the conditions for an electron-beam process of materials formation, the results obtained can be divided into two types: those determined by the condition of evaporation of the target and those determined by the conditions of coating deposition. The density of flows of elements, evaporated from the target, is determined by their specific heat of evaporation. However, the ratio of atoms in the flow, derived in this way, may not be retained in the formed coating due to the secondary evaporation of elements from the growth surface. The obtained results allow us to substantiate principles for the selection of components for achieving the optimal element and phase compositions of high-entropy alloys.</p>
Authors and Affiliations
Oleg Sobol’, Alexander Barmin, Svitlana Hryhorieva, Viktor Gorban’
Keywords
Related Articles
- EP ID EP527945
- DOI 10.15587/1729-4061.2018.126545
- Views 77
- Downloads 0
Study of low-emission multi-component cements with a high content of supplementary cementitious materials
<p>The studies have established the influence of various types of supplementary cementitious materials on physical and mechanical properties and structure formation of low-emission multi-component cements. The results of...
Analysis of the efficiency of spacetime access in the mobile communication systems based on an antenna array
<p class="Default">We performed analysis of effectiveness of various methods and criteria of space-time processing of the signals by an adaptive antenna array with a view to identifying the algorithm suitable for using i...
Development of the positive engagement continuously variable transmission design with the application of graph theory
<p>Various designs of CVTs were explored from two points of view: analysis of the design itself and analysis of the methods and techniques, used in the process of creation of the CVT. To solve the problem of finding new...
Development of structural-parametric optimization method in systems with continuous feeding of technological products
<p>Increasing the efficiency of continuous technological processes, in practice, involves certain difficulties. The presence of these difficulties is due to the fact that the technological product quality is functionally...
Development of intelligent demographic forecasting system
The scientific methodological and functional principles of the intelligent decision support system for the management of demographic situation based on predictions are developed. Predictions (prognosis) of the changes in...