Influence on the durability of work of high-temperature rotors of long-term static strength and low cycle fatigue
Journal Title: Наукові праці Донецького Національного Технічного Університету серія: Електротехніка і Енергетика - Year 2018, Vol 1, Issue 1
Abstract
A significant part of heat and mechanical equipment at Ukrainian thermal power plants has reached the end of normative and extended operating life. The power plants were commissioned 30-40 years ago and now appear to be obsolete morally and physically. The damage of the elements has increased in the zone of high temperatures and this reduces the technical and economic indicators of turbo-installations and requires additional costs for its repairing. Meanwhile a significant part of the nodes and parts that operate in the zone of moderate temperature remains suitable for further operation. It is necessary to identify the effect of long-term durability and low cycle fatigue on the operation of steam turbine rotors. Design operating life is established taking into account the creep of the material under prolonged static loading and low cycle (thermal) fatigue. The limited period of permissible operation at the stage of fracture development is evaluated during operation, if necessary. The probability of cracks in the stress concentration zones is the highest. Such zones in the turbine rotors appear to be the rims of the discs with slots for shank blades, axial channel and thermal grooves in the seals area, radius transitions from the disk to the rotor body. The thermal stresses for thermal grooves are critical in terms of the probability of cracking, but this zone does not limit the service life of turbines that operate in the base mode. The assessment of low cycle fatigue is carried out in critical zones of the nodes, which are exposed to thermal stresses due to thermal cycling under variable-load operation. It is typical that fractures due to low cycle fatigue appear after the turbine units achieve a working time of 2·105 hours and even less, in some cases. Accumulated irreversible residual deformation in metal due to the creep and thus a metal plastic property decrease is the main feature of the problem of high-temperature rotors operating life. The main factors that limit the failure-free operation of the structure during long-term loading are limiting deformations or destructive stresses depending on the operating conditions. The design creep deformation usually lays within 0,3-1 %. The lower service life total deformation assigned, the bigger is the stress margin with respect to longterm strength. Normative reserve with respect to long-term strength is ensured if the accepted maximum permissible deformation of creep is no more than 1%. Metal creep and low cyclic fatigue are the main factors that determine the operation time of high-temperature rotors.
Authors and Affiliations
T. N. PUGACHOVA, A. V. KOSHELNYK, O. V. KRUGLYAKOVA
Keywords
Related Articles
- EP ID EP660339
- DOI -
- Views 210
- Downloads 0
Research and development of weather-dependent control of heating and air-conditioning specialist areas.
The system of automatic control of heating and air conditioning of certain types of specialized facilities is examined. To study the processes of control we suggest a simplified mathematical model of specialized premise...
Using the method of exergy analysis to evaluation the efficiency of energy-conversion of glass production plants.
Modern energy technology complexes of glass production, in addition to glass furnace itself, also include systems for utilization of thermal waste energy resources. When equipping the furnace with evaporativ...
The converter unit with function of voltage stabilization for a combined power supply system with renewable power sources.
Combined power supply systems with renewable energy sources are used for local facilities in order to ensure stable power supply by using existing overloaded networks remote from transformer substations that are charac-...
Quasioptimal control of synchronous motor with permanent magnets using a strategy of "maximum torque per ampere"
For synchronous motors with built-in permanent magnet rotor was made a comparison control strategy "maximum torque per ampere (MTPA)" and the sample vector control algorithm with maintaining co...
The substantiation of the energy monitoring automated system structure
The policy of energy saving provides development of the highly effective automated systems of accounting of power consumption. Research objective is increase in efficiency of development, introduction and further operati...