Investigation Antiwear Properties of Lubricants with the Geo-Modifiers of Friction
Journal Title: Tribology in Industry - Year 2017, Vol 39, Issue 3
Abstract
The article describes the influence of the geo-modifiers of friction on the antiwear properties of lubricants. Geo-modifiers of friction are the fine powders of mineral materials. This work is directed on the investigation the influence of the geo-modifiers of friction in the form of the hard lubricant compositions, which based on a mineral serpentine, on the anti-wear properties of greases and gear oils. This composition is the fine powder serpentine with the addition of components such as chalk, borax, kaolin and talc. We compared the antiwear properties of the greases without geo-modifiers of friction and the antiwear properties of greases containing the geo-modifiers of friction from 0.5 % to 3 %. The Litol-24 and transmission oil TAD-17 was used for testihg. The four-ball machine of friction was used for tests accordance with GOST 9490-75. As geo-modifiers the serpentine was used, the fraction of which has a size from 0.87 microns to 2.2 microns. Such parameter as the wear scar diameter was used for evaluation of the antiwear properties of lubricants. As a result of tests it was established that the antiwear greases properties improved on 26-50 % depending on the concentration of the geo-modifiers of friction based on the pure serpentine.
Authors and Affiliations
I . Levanov, A . Doykin, E . Zadorozhnaya, R . Novikov
Keywords
Related Articles
- EP ID EP229712
- DOI 10.24874/ti.2017.39.03.04
- Views 42
- Downloads 0
Tribology Database as Platform for Mobile Database and use of Mobile Technologies
In the last few years changes in information technologies, are numerous and dynam. One of those changes is the massive use of mobile devices. They have not only been used for communication, but also for access to applica...
Methods of Assessing the Resource of the Crankshaft Bearing of Internal Combustion Engine Based on the Calculation of Hydro-Mechanical Characteristics
The purpose of the article is to develop a tool to assess the theoretical resource crankshaft bearings of internal combustion engine. As a result, two methods for evaluating of the theoretical resource crankshaft bearing...
Tribological Properties of Steel and Al-Alloys Sheet Metals Intended for Deep Drawing
During the last few years, aluminium alloys are increasingly more used in production of light constructions, especially for manufacture of light car bodies of passenger cars. From the aspect of tribological factors influ...
Fracture Toughness and Tribological Wear Behaviour of Micro Alloyed Pearlitic- Ferritic Ductile Cast Iron
Fracture toughness and wear behaviour of micro alloyed ductile iron were investigated. Hardness, fracture, fracture toughness and wear tests were carried out on the ductile irons samples (D1, D2, D3, D4 and D5), containi...
Influence of the Number of Bilayers on the Mechanical and Tribological Properties in [TiN/TiCrN]n Multilayer Coatings Deposited by Magnetron Sputtering
In this work the influence of the number of bilayers was studied on the mechanical, tribological and electrochemical properties of multilayer coatings [TiN / TiCrN]n as a function of the number of bilayers n = 1,...