Investigation Of Mechanical Behavior Of Hybrid Composites Reinforced Nettle Fiber-Hazelnut Shell Flour.
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2017, Vol 5, Issue 4
Abstract
Polymer beam specimens produced with reinforcement of nettle fiber and fixed nut hazelnut flour at different volume ratios were opened initial notches with a / W = 0.2, 0.3 ratios after thermal curing. The volume percentage of nettle fiber in the composite is 2.5, 5, 7.5 and 10 percent. The grain size of hazelnut shell flour is 0-50μ and the volume ratio in the composite is 15% in all samples. Mechanical behavior in the study was investigated in the context of fracture, three point bending and impact test. Mode I fracture behaviors of compacted specimens from single sides, compact tensile and mechanical behavior were determined by three point bending test and impact test. The amount of crack opening was determined by the high-speed camera recorder. The bending test determined bending modulus and bending stresses. The morphological structure of the fractured surfaces obtained from the impulse test was revealed by sem views. It has been observed that the added hazelnut flour enhances the flexural modulus while reducing bending stress, fracture strength and impact resistance.
Authors and Affiliations
Kenan BÜYÜKKAYA
Keywords
Related Articles
- EP ID EP489239
- DOI 10.29109/http-gujsc-gazi-edu-tr.337247
- Views 103
- Downloads 0
Demodulation of PDSM Signal by Using Multiple Sampling Technique
The design of modulator and demodulator for wireless optical communication systems is one of the important issues. In this paper, a new receiver scheme is proposed for PDSM (Pulse Dual Slope Modulation) architecture whic...
Contractors in the Construction Sector and R & D
Innovation is widely regarded as one of the key issues of national economic growth and competitiveness. Measurement of innovation and implementing it as a corporate culture is considered necessary as it is one of the key...
Use of Dspic in Mıcrocontroller Based Systems and Sample Application Development Process
Nowadays, microcontroller based control and monitoring systems are being used in several industrial applications. This study deals with dsPIC (Digital Signal Controller) microcontroller, usage of which is becoming more w...
Real Time Measurement of Average Winding Resistances of Transformers
The monitoring of transformers that are expensive equipment of power systems is the one of important issues. Transformer monitoring systems are usually used in order to detect failures, to determine the lifetime, to meas...
Design and Implementation of Automation System for Water Leakage Test in Vehicle
In this study, design and implementation of automation system for water leakage test, which is one of the quality control tests, in vehicle is explained in detail in order to ensure continuous operation and without inter...