INVESTIGATION OF THE PROCESS OF DISPERSION OF NANO-STRUCTURED PAINTS OF BARRIER TYPE
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2018, Vol 41, Issue 2
Abstract
The work is dedicated to the development of nano-structured paints with a barrier effect. The process of the preparation of such compositions has been studied. The influence of various technological parameters on the processing of these compositions is shown. A practical and effective method for monitoring the progress of this process is proposed. The contribution of technological parameters that allow scaling of the obtained results to experimental and industrial technological lines equipped with serial equipment for the production of paint and varnish composite materials for various purposes is estimated, namely, the dependence of the processing efficiency of carbon nanotubes in the solution medium of an epoxy oligomer on the angular velocity is established. In addition, the temperature limits for the processing of these nanotubes are established for the preparation of nano-structured paint and varnish compositions, which have a barrier effect. It has been established that for the intensification of the processing process, it is necessary to use dispersing bodies and assess the effect of their geometric parameters together with the degree of filling on the efficiency of this processing process. On the basis of this research, the mathematical expression connecting volume capacity with various technological parameters for an estimation of efficiency of process of manufacture of the nano-structured paint and varnish compositions possessing barrier effect is offered.
Authors and Affiliations
N. A. Apanovich,, E. Y. Maksimova, A. V. Alekseenko
Keywords
Related Articles
- EP ID EP405883
- DOI 10.26480/jmerd.01.2018.42.48
- Views 98
- Downloads 0
CONTROLLABLE VIBRATING SYSTEM TO ENHANCE THE PERFORMANCE OF HEAT PIPE EVACUATED TUBE SOLAR COLLECTOR
Mechanical vibration is used to excite a heat pipe evacuated tube solar collector (HP-ETSC), where two (HP-ETSC's) are built identically to compare the performance of the solar collector with and without applying vibrati...
THE PROSPECTIVE PROCESSING LINE FOR THE PREPARATION OF COMPLETE FE ED FOR LONG-TERM STORAGE
An important condition for increasing the livestock production efficiency and production of livestock products and reducing their cost is full-value feeding, the provision to the farm animals complete multicomponent feed...
PARALLEL PROGRAMMING MODELS FOR CALCULATING THE PHYSICAL CHARACTERISTICS OF COMPOSITES
This article reviews the performance of supercomputers. The increase in computational performance is also provided through parallel programming, the development of which is represented by a set of high-level programming...
THE FAULT LOCATING SYSTEM OF THE HIGH-SPEED MAGLEV TRAIN
Analyzing and researching the levitation and guidance sensor fault location system of high-speed maglev train, we developed an offline testing method of sensor fault location system, which can carry on the fast positioni...
CFD SIMULATION OF SAWDUST GASIFICATION ON OPEN TOP THROATLESS DOWNDRAFT GASIFIER
Sawdust is one of alternative energy sources to substitute the fossil fuels. The utilization of sawdust to produce energy can be done through different types of technologies. Gasification is one of techonology that can b...