Investigation of the stress-strain state of seamless pipe in the initial state
Journal Title: Archive of Mechanical Engineering - Year 2014, Vol 0, Issue 4
Abstract
Mechanical properties of the pipeline samples that had been cut in annular and axial directions were investigated. The methodology of modeling and calculation of the real stress-strain state was described. The stable state during in the deformation process was defined. The results of the experimental researches were used as a test variant during examination of pipe strength.
Authors and Affiliations
Jerzy Małachowski, Petr Yukhumets, Grigorii Beliaiev, Roman Dmitryenko, Ihor Prudki, Volodymyr Hutsaylyuk
Keywords
Related Articles
- EP ID EP168119
- DOI 10.2478/meceng-2014-0034
- Views 76
- Downloads 0
Implementation of a geometric constraint regularization for multibody system models
Redundant constraints in MBS models severely deteriorate the computational performance and accuracy of any numerical MBS dynamics simulation method. Classically this problem has been addressed by means of numerical decom...
On the critical points of vertical vibration in a railway vehicle
This paper evaluates the level of the vertical vibrations in a railway vehicle carbody generated by the track irregularities and examines the position of the critical point from the comfort perspective. The issue is revi...
Influence of high pressure and high temperature hydrogen on fracture toughness of Ni-containing steels and alloys
The effect of hydrogen on short-term strength, low-cycle durability and planestress fracture toughness of 10Cr15Ni27 steel, 04Cr16Ni56 and 05Cr19Ni55 alloys at pressure up to 35 MPa and temperature 293. . . 773 K was inv...
Comparative performance with different versions of low heat rejection combustion chambers with crude rice bran oil
It has been found that the vegetable oils are promising substitute, because of their properties are similar to those of diesel fuel and they are renewable and can be easily produced. However, drawbacks associated with cr...
Reliability assessment of a turbogenerator coil retaining ring based on low cycle fatigue data
Turbogenerator coil retaining rings are shrunk-fitted onto the rotor over the coils, in order to restrain them against the centrifugal force. They are typically subjected to low cycle fatigue, with a cycle being complete...