Investigations with the aim of obtaining a mass for pressing medicated chewing gums "Lysodent C"

Journal Title: ScienceRise: Pharmaceutical Science - Year 2019, Vol 0, Issue 3

Abstract

<p>The design of high quality compressed medicated chewing gum "Lysodent C" with lysozyme hydrochloride and ascorbic acid as active pharmaceutical ingredients and the composition Health in Gum<sup>®</sup> PWD-01 as a chewable gum base involves obtaining a homogeneous mass for pressing. In order to prevent the segregation of the mass for pressing due to its polydispersity, it was necessary to carry out a preliminary granulation of the substance of lysozyme hydrochloride, which is characterized by fine dispersion, hygroscopicity and insufficient pharmacotechnological properties for direct compression method.</p><p><strong>Aim of the work </strong>– to carry out physicochemical and pharmacotechnological studies in order to obtain a homogeneous mass for pressing medicated chewing gums "Lysodent C".</p><p><strong>Materials and methods. </strong>The objects of study are granulate of lysozyme hydrochloride (Bouwhuis Enthoven, the Netherlands) with an intensive sweetener sucralose (Solo Sucralose-Non Micronised NF, VB Medicare PVT. LTD., India) and a flavoring agent (Nat Apple Flavor Wonf, Kerry Inc., Malaysia), and also a mass for pressing, obtained by mixing the granulate, the composition Health in Gum<sup>®</sup> PWD-01 (Cafosa, Spain) and ascorbic acid (Foodchem, China). As a granulating liquid ethanol 96 % was used. During the experiment, physicochemical (moisture absorption capacity), pharmacotechnological (optical microscopy, flowability, bulk density and tapped density, determination of particle size by analytical sieving) and statistical studies in accordance with the requirements of SPhU 2.0 were used.</p><p><strong>Results</strong><strong>. </strong>Crystallographic analysis revealed similarity in size and shape of the obtained lysozyme hydrochloride granulates with the granules of Health in Gum<sup>®</sup> PWD-01, which was also confirmed by the study of the fractional composition – particles with a size of 1.0 &gt; n ≥ 0.7 are their main fraction. In addition, the conversion of lysozyme hydrochloride powder to granules improved its pharmacotechnological characteristics. However, granulate, like the pure substance of lysozyme hydrochloride, is hygroscopic, which requires, respectively, a decrease in its moisture absorption capacity. Crystallographic analysis of the mixture obtained by mixing the granulate and Health in Gum® PWD-01 with premixing of ascorbic acid, established its dispersion homogeneity, and the study of its technological characteristics – good flowability, which will ensure high-quality compressed gums. The moisture absorption capacity of the formed mass for pressing did not decrease, but on the contrary increased, due to the presence in the mixture of such hygroscopic components as lysozyme hydrochloride and chewing gum base.</p><p><strong>Conclusions.</strong> It was established that the use of pre-granulation of lysozyme hydrochloride led to the homogeneity of the resulting mass for pressing. However, the hygroscopicity of the mixture requires the introduction of moisture-absorbing agents in its composition or compliance with 40 % of the relative humidity of the environment during the preparation of the drug</p>

Authors and Affiliations

Yuliia Maslii, Olena Ruban, Tetiana Kolisnyk

Keywords

Related Articles

Development of quality control methods of promising anticonvulsant

<p>In the previous studies, NUPh scientists proved that the search of potential anticonvulsants among derivatives of 1,3,4-thiadiazole is very perspective [1-3]. At the medicinal chemistry department of NUPh N-(5-ethyl-[...

Analysis of psychotropic medicines triazolam, estazolam and alprazolam mixture using high-performance liquid chromatography method

Poisoning of benzodiazepines, particularly triazolam, estazolam and alprazolam usually is caused by consumption of the drug in bigger doses than prescribed. So, for the fast determination of material caused poisoning, s...

Synthesis of potential antiexudative preparations for 2-((4-amino-5-(furan-2-il)-1,2,4-triazole-(4H)-3-yl)-sulfanyl)-N-acetamide series

<p><strong>Aim.</strong> Conduct the purposeful synthesis of new potential biologically active substances of derivatives of 2 - ((4-amino-5- (furan-2-yl) -1,2,4-triazol (4H) -3-yl) -sulfanyl) -N-acetamides and evaluate t...

Влияние состава липосом на степень инкапсуляции и размер частиц при создании липосомальной формы цитохрома С

<p>Рассмотрено влияние состава липосом на степень инкапсуляции и размер частиц при фармацевтической разработке липосомальной формы цитохрома С.</p><p><strong>Цель работы:</strong> изучение влияния состава липосом на степ...

Influence of dry extract of brassica olearacea on the morphological structure of the gastric mucosa of rats during an experimental ulcer caused by alcohol-prednisolone mixture

<p><strong>Aim</strong> – study of the effect of cabbage dry extract on the morphological state of the gastric mucosa of rats on the background of an experimental alcohol-prednisolone ulcerative lesion.</p><p><strong>Mat...

Download PDF file
  • EP ID EP647846
  • DOI 10.15587/2519-4852.2019.172272
  • Views 170
  • Downloads 0

How To Cite

Yuliia Maslii, Olena Ruban, Tetiana Kolisnyk (2019). Investigations with the aim of obtaining a mass for pressing medicated chewing gums "Lysodent C". ScienceRise: Pharmaceutical Science, 0(3), 11-16. https://www.europub.co.uk/articles/-A-647846