Laser Surface Alloying of Some Steels from SiC Predeposited Powders
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2008, Vol 31, Issue 2
Abstract
For the purpose of studying the possibilities of increasing the wear resistance, specimens of three steels with 0.2%C, 0.46%C and 1%C were surface alloyed with reinforcement from overlapping pastes with green SiC hard particles with the granulation 800 and 320. The melting of surface layer was performed by CO2 continous wave laser on a numerical x-y table. On these specimens the micro structural characteristics, geometry of molten zone, micro hardness variation in the alloyed layer depth and the HV5 hardness on a laser processed surface were determined, which allowed defining the added material with the best hardening effect. The conditions to obtain compact surface layers with 2-3 time higher hardness than the base material were determined.
Authors and Affiliations
S. M. LEVCOVICI, D. T. LEVCOVICI
Keywords
Related Articles
- EP ID EP659452
- DOI -
- Views 49
- Downloads 0
The Study of Metal-Old Wood Interactions Under the Influence of Pedological Factors
In the manufacture of wood objects, for binding and strengthening were used nails, cramps and other metallic elements, which in the archaeological site suffered degradation and deterioration processes, specific to metal-...
Studies and Research on the Production of TiO2 and TiN Thin Films by Assisted Physical Vapor Deposition Magnetron Process
The experimental research carried out in this paper aims at obtaining thin films of TiO2 and TiN and at characterizing them in terms of morphology, structure, transparency and electrical properties. The films were obtain...
Optimization of Thermomechanical Processing of Some Aluminum Alloys by Dimensional Interpolation Method Using the Matlab
This paper presents results of research on optimization of thermomechanical treatment applied to an alloy of the Al-Zn-Mg-Cu system, used in the aviation industry.Optimizing thermomechanical treatment process is based on...
Statistical Correlations Between Chemical Composition and Mechanical Properties of A516 Grade 65 Steel
In order to respond to required demands associated to certain operation conditions, the steels used in petroleum, petrochemical and chemical processing industries must have significant improved mechanical properties. The...
Corrosion of Composite Ferro-Niobium Layers in Cobalt Matrix
The ferro-niobium composite layers in cobalt matrix were obtained by cathode depositing from electrolyte solutions on steel base. The electrolyte included in its composition cobalt sulphate and cobalt chloride, boric aci...