Life cycle assessment of technical systems taking into consideration degradation processes in materials of constructions
Journal Title: Archives of Materials Science and Engineering - Year 2018, Vol 1, Issue 89
Abstract
Purpose: In the engineering analysis and transport forensic examination, there are often arise problems in establishing the causes and mechanism for the destruction of structural elements. At the moment, such problems are poorly formalized and practically do not take into account the degradation of the material and the gradient of its properties when destroyed. The purpose of this article was to build a methodology for determining the distribution of material properties at the initial time and establishing its compliance with the requirements of regulatory documentation. Design/methodology/approach: As a technique for solving the problem, was proposed the expansion of a function in a given basis with subsequent refinement of the solution using iterative algorithmic schemes. Findings: Using the developed approaches, it is established that in the surface layers of 12X18H10T steel (AISI 321), after technological modification under the conditions of laser doping, functional-gradient layers are formed with the material viscosity level characteristics at 0.8, which corresponds to the established norms, and their destruction occurred as a result of excessive loads. Practical implications: With the using of the developed methods makes it possible to solve the problem of technical forensic examination to determine compliance to the requirements the properties of functional gradient materials in initial time. Originality/value: The technique of solving inverse problems of fracture mechanics for functional gradient materials is shown for the first time.
Authors and Affiliations
Z. Stotsko, M. Kuzin
Keywords
Related Articles
- EP ID EP270023
- DOI 10.5604/01.3001.0011.5724
- Views 100
- Downloads 0
Modelling of the effects of laser modification of gas-nitrided layer
Purpose: The effects of laser processing parameters on the dimensions of simple laser tracks, produced on the previously nitrided layer, were analysed. Design/methodology/approach: Gas nitriding is one...
Quality-cost analysis of modern carburising technology implementation in the production cycle of cog elements for the aviation industry
Purpose: The aim of the study was to analyse the possibility of introducing vacuum carburising technology with pre-nitriding in the aviation industry. Design/methodology/approach: The samples have been tested with new te...
The effect of CaF2 and BaF2 solid lubricants on wear resistance of laserborided 100CrMnSi6-4 bearing steel
Purpose: In this paper, laser alloying with boron and solid lubricants was used in order to produce the self-lubricating layer on 100CrMnSi6-4 bearing steel. The influence of CaF2 and BaF2 on microstructur...
Effect of ageing time on microstructure and mechanical properties of SAF 2205 duplex stainless steel
Purpose: SAF 2205 duplex stainless steels (DSSs) are materials characterized by a favourable combination of the properties of ferritic and austenitic stainless steels. This type of stainless steel presents g...
Application of polymer impression masses for the obtaining of dental working models for the stereolithographic 3D printing
Purpose: The aim of the work is to execute measurements of digital dental models taken by scanning prosthetic impressions using the engineering CAD software and finding dimensional differences and scale factor for precis...