Magnetic Induction Tomography: A Review of Process and Medical Tomography Systems
Journal Title: روش های هوشمند در صنعت برق - Year 2017, Vol 8, Issue 31
Abstract
Being a non-contact safe imaging technique, MIT has been an appropriate method for non-invasive and non-destructive industrial and medical imaging. In this imaging method, a primary magnetic field is applied by one or more excitation coils to induce eddy currents in the material to be studied, and then the secondary magnetic field from these eddy currents is detected in sensing coils. Image reconstruction is obtained from estimated electric conductivity coefficients by using measurement data and solutions of forward and inverse problems. MIT is a promising modality for noninvasive medical imaging due to its contactless and nonionizing technology. On the other hand, one of the needs of experts in oil/gas industry is to get information about process inside pipelines and tanks containing oil and gas, which is usually not accessible without disconnecting the process. For this reason, tremendous efforts have been made on measurements and nondestructive tests without physical disconnecting the process. In recent years, applications of process tomography as an imaging non-invasive tool for imaging from inside of pipelines, monitoring and measuring flows have increased. In this Paper, the properties of process and medical tomography systems reviewed.
Authors and Affiliations
Mohammad Reza Yousefi
Keywords
Related Articles
- EP ID EP317678
- DOI -
- Views 83
- Downloads 0
Improved Angular Tracking Accuracy in Phased Array Radar
Monopulse is a technique which is used to detect radiation direction of waves. Radiation can be originated from active sources such as radar antennas, disturbances, etc., or passive sources, such as the reflector plates...
Design and simulation of a new sample and hold circuit with a resulation of 12-bit and a sampling rate of 1 GS/s using a dual sampling technique
In this paper, a new sample and hold circuit (S & H) with a 12 bit resolution and sampling rate of 1 GS/s is proposed using dual sampling technique. The dual sampling technique allows the circuit to always operate in hig...
Short-Term Load Forecasting of Distribution Power System for Weekdays Using Old Data
Estimation of daily load in distribution companies which is performed to present the results to the DMS, is necessary. Daily load forecasting of power systems has traditionally been considered. Because load patterns are...
Design and Simulation of a High Step-up Three Level Boost Converter with Coupled-Inductor and Passive Clamp
Recent developments in renewable energy sources has created demands for high step-up and high efficiency DC-DC converters. This demands are fulfilled basically through the use of high frequency transformer to achieve the...
Location-aware News Recommendation System with Using Fuzzy Logic
with release of a huge amount of news on the Internet and the trend of users to Web-based news services.it is necessary to have a recommendation system. To grab attentions to news, news services use a number of criteria...