MATHEMATICAL MODELING AND NUMERICAL SIMULATION OF THE DRYING PROCESS OF SEEDS IN A PILOT PLANT
Journal Title: INMATEH-Agricultural Engineering - Year 2019, Vol 57, Issue 1
Abstract
The artificial drying of grain seeds is widespread to ensure that they are preserved, as reducing the water content allows products to be stored for long periods of time without the need for complex storage facilities. The proposed drying installation is a low-capacity pilot one, which can change and monitor in real time a series of important parameters of the drying process. By means of the CFD simulation the construction of the cylindrical box and of the deflectors was optimized. This leads to reaching a uniform drying and to reducing the energy consumptions.
Authors and Affiliations
V. N. Arsenoaia, V. Vlăduț, I. Țenu, G. Moiceanu, P. M. Cârlescu
Keywords
Related Articles
- EP ID EP552961
- DOI -
- Views 91
- Downloads 0
INFLUENCE OF TYPES OF TRACTOR RUNNING GEARS ON THE VALUE OF HOP GARDEN ROW SPACING COMPACTION
Based on experimental research, a method of comparing areas of compaction by tractor running gears in field conditions and in hop garden row spacing was suggested. Zones of inefficient and intensive use of hop garden row...
RESEARCH ON THE BLOCK-PORTION SEPARATOR PARAMETERS INFLUENCE ON THE ADJUSTMENT RANGE OF OPERATING ELEMENTS SPEED
The article focuses on solving the problem of reducing the energy intensity of the separating ensilage fodder process from trench silo with the block-portion method by developing and substantiating the parameters and ope...
RESULTS OF LABORATORY INVESTIGATIONS OF SOIL SCREENING ABILITY OF A CHAIN DIGGER WITH ASYMMETRIC VIBRATOR ARRANGEMENT
The increased yield of onion sets through the use of high-yielding hybrids as seed material entails an increase in weight and number of onion bulbs per one running meter. Consequently, the onion set heap supply from the...
EVALUATION OF IMPACT SYSTEMS NOISE LEVEL IN GRAIN PRODUCTION
Threshing of grain mass in the threshing and separating devices is one of the most «noisy» operations. The main noise sources of a working thresher are the processes of impact interaction of grain with the threshing devi...
DETERMINATION OF ROLLING RADIUS OF SELF-PROPELLED MACHINES’ WHEELS
The obtained results allow calculating the actual rolling radius of the wheel and evaluate the slipping of the drive wheels of self-propelled machines in accordance with the air pressure in the tires and the parameters o...