Micro-crack Characteristics of Aluminum 1050 Sheets in Bending at Elevated Temperatures

Abstract

Used in several industrial applications, aluminum 1050 sheets have good balance between ductility and strength. Its corrosion resistance and reflectivity make it preferred alternative for food processing containers and light reflective panels. However, forming and bending processes affect its surface quality by the formation of microcracks within the forming zones and along the bending lines, downgrading its reflective and microbiological advantages. Raising temperature through direct flame on the deformation region during bending lead to improvement in surface quality along the bend line by reducing micro-crack widths. Other mechanical properties were also found to benefit from elevated bending temperatures, including springback and microhardness within the bend region. Nevertheless, benefits gained from elevated temperature were noticed to overturn between 100°C to 150°C depending on sheet thickness and the measured mechanical property. In general, behavior of mechanical properties appeared to reasonably correlate with the average micro-crack width on the bent surface.

Authors and Affiliations

Naser Abdulrahman Alsaleh

Keywords

Related Articles

Computation of Total Sediment load in River Osun, Southwestern Nigeria

Modeling of sediment transport can be used to solve environmental and water quality problems. Sediment transport rate hinge upon hydraulic flow, upstream sediment supply and bed composition. River Osun is a river in sout...

“Robust Video Watermarking using Discrete Cosine Transform and Third level Discrete Wavelet Transform”

Digital watermarking technique is becoming popular for copyright information. The watermark embedded in the digital video may be incorrectly detected and extracted due to lack of appropriate algorithm, so the main concer...

Flow Investigation inside A Curved Square Duct

This paper presents the results of an experimental work with measurement of wall static pressure of 90°C shaped Curved duct. The test duct is made up of transparent perspex sheets to facilitate the flow visualization stu...

The Effect of Hydrodynamics on Riser Reactor Performance of the FCCU

The effect of hydrodynamics on the riser reactor performance was studied. The simulation was carried out using COMSOL Multiphysics software. The simulation results showed that reaction rate increased with increase in tem...

Patenting of Software Embarked Under the Optics of Brazilian Legislation

Embedded Electronics Systems are types of systems that are present in the day to day in the most diverse equipment, developed to solve technical problems of repetitive form. The purpose of this case study is to present q...

Download PDF file
  • EP ID EP392410
  • DOI 10.9790/9622-0709061927.
  • Views 110
  • Downloads 0

How To Cite

Naser Abdulrahman Alsaleh (2017). Micro-crack Characteristics of Aluminum 1050 Sheets in Bending at Elevated Temperatures. International Journal of engineering Research and Applications, 7(9), 19-27. https://www.europub.co.uk/articles/-A-392410