Mineral Processing Route and Safety in Plant Operations
Journal Title: Journal of Advanced Research in Manufacturing, Material Science & Metallurgical Engineering - Year 2018, Vol 5, Issue 3
Abstract
Sampling and Chemical characterisation of head sample are very important stage prior to choosing mineral processing route. Particle size analysis, Mineralogical assessment is another determinant for the liberation size of the mineral from the gangue; these guide in the determining the use of processing technique. Magnetic method, Gravity methods, Froth flotation, Dewatering and Scrubbing method are known mineral processing methods were used in arriving at a suitable processing route. The evaluation of health hazards within the treatment of mineral is gaining more and more importance in industries. The need to control occupational health and safety in plant operations has been recognized and regulations which describe general protective measurements for personnel provide a tool to protect their health. It is the aim of this paper to give details in the determination of mineral processing route and safety in plant operation for practical approaches to risk assessment and to present measures for exposure reduction
Authors and Affiliations
O. O. Alabi
Keywords
Related Articles
- EP ID EP535321
- DOI -
- Views 110
- Downloads 0
Structural and Ionic Conductivity Properties of Gamma Irradiated HPMC Polymer Electrolyte Films
A solid biopolymer electrolytes (BEs) based on hydroxypropyl methylcellulose (HPMC) doped with different concentrations of cadmium chloride (CdCl2 ) and ceric ammonium nitrate (NH4 ) 2 Ce(NO3 ) 6 (CAN) were prepared by s...
Microstructure and Characterization of Ni-Cr Alloy-Spray Repaired Steel
In today’s era of manufacturing, wear upon the surface of component is the major problem of all materials. This wear can be reduced to great extent by applying some coating onto the surface of material. The as-sprayed co...
Multi Objective Optimization of Pitting Corrosion Rate of Micro Plasma Arc Welded Titanium (Ti-6Al-4V) Alloy Sheets using TOPSIS
Titanium is having good anti-corrosion properties in both basic and acidic medium. However, when it is subjected to severe heating processing like welding, there is a possibility of corrosion formation at the weld joint....
Study on Microstructural and Mechanical Properties of Dissimilar Joint of Laser Beam Welded Inconel 625 and SS 316
This paper investigates the microstructure and properties of deep penetrated laser welded dissimilar joints of Inconel 625 nickel based alloys and 316 Stainless Steel. Evaluation of weld microstructures through optical m...
Learning to Lean in a ‘Make in India’ Scenario
Make in India’ as a policy initiative is not only being watched by the world but is attracting good overseas support. There is a complementary opposition from local political groups, who await to see its debacle, though...