Minimization of Casting Defects Using Casting Simulation Technique and Casting Defects Analysis Using Design of Experiment

Abstract

In this paper Computer simulation technique and design of experiment used for casting defects analysis. In the first part using casting simulation technique analysis for shrinkage porosity defect is performed and new gating system designed. Number of iteration performed using simulation software to achieve optimum design. With new gating system reduction in shrinkage by (about 2.85 %) and yield improvement by ( about 9.85 % ) is observed. In the second part DOE used for casting defects analysis so sand related and pouring practices related parameters considered are moisture content, sand particle size, mould hardness and pouring temperature. Taguchi based L9 orthogonal array was used for the experimental purpose and analysis was carried out using Minitab software for analysis of variance (ANOVA).

Authors and Affiliations

Atul A. Bhujugade, Vijay B. Sabnis

Keywords

Related Articles

Research of reliability parameters of transport level of the next generation networks

This article devoted to the transport level of infocommunication network, examines the parameters of reliability of each equipment. The statistical data MTBF and average recovery time of each component failures. Calcula...

Preparation and Properties of Optical Fibre Glass for Communication

Optical fiber communication technology is fastest growing technology in the field of communication. This is mainly due to low transmission losses and low attenuation losses of the signal which has prime importance in th...

slugAcoustic Echo Cancellation by Adaptive Combination of Normalized Sub band Adaptive Filters by Using Stochastic Gradient Algorithm

Acoustic echo is a common occurrence in today’s telecommunication systems. It occurs when an audio source and sink operate in full duplex mode; an example of this is a hands-free loudspeaker telephone. In this situation...

slugAn analysis of current security issues and solutions for cloud computing

The progress of cloud computing services is accelerating the rate in which the organizations outsource their computational services or sell their idle computational resources. Even though migrating to the cloud remains...

Touchpad Control of Solar Powered Wheel Chair

In Mobility of the physically disabled or crippled people is a great concern of the society One of the best inventions in the medical field that helped both the elderly and the handicapped is the mobility vehicle. This...

Download PDF file
  • EP ID EP20993
  • DOI -
  • Views 233
  • Downloads 5

How To Cite

Atul A. Bhujugade, Vijay B. Sabnis (2015). Minimization of Casting Defects Using Casting Simulation Technique and Casting Defects Analysis Using Design of Experiment. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 3(6), -. https://www.europub.co.uk/articles/-A-20993