Modeling and simulation of fiber optic transmission links
Journal Title: SCIENCE, ENGINEERING AND TECHNOLOGY - Year 2022, Vol 2, Issue 1
Abstract
The main aim of the paper is modeling and simulation of fiber optic transmission. It also deals with ways to increase the capacity of fiber optic transmission links by using WDM (Wavelength Division Multiplexing) system. The parameters of the fiber optic transmission link were measured on a real optical transmission links and a model for simulation was set up. A simulation of increasing the capacity of a fiber optic transmission link was made in two ways. The first one is to increase the transmission speeds of the individual channels of the WDM system, and the second one is to increase the number of WDM system channels with lower individual speeds. The simulation results showed that the second method provides better quality of WDM service. The additional experiment was done on an existing ITU T G.655 optical fiber intended for WDM systems whose parameters were measured. Bit error rate and Q parameter for WDM system of 4 and 16 channel was used to check quality of proposed solution.
Authors and Affiliations
Nermin Goran, Mujo Hodzic, Anis Maslo, Aljo Mujčić
Recognition of traffic generated by WebRTC communication
Network traffic recognition serves as a basic condition for network operators to differentiate and prioritize traffic for a number of purposes, from guaranteeing the Quality of Service (QoS), to monitoring safety, as wel...
Impact of Covid-19 on the Logistics Sector of Public Postal Operators in The Western Balkans
The Covid-19 pandemic has a direct impact on the social, economic, political, and other segments of society through a large number of lockdowns in 2020 and 2021. The largest postal and logistics companies as an integral...
Impact of Road Pavement Condition on Vehicular Free Flow Speed, Vibration and In-Vehicle Noise
Road infrastructure in good condition is a key requirement for efficient transportation systems which leads to economic prosperity and improved quality of life. However, road surface conditions deteriorate over time acco...
Analytical and Numerical Contact Stress Analysis of Spur Gears
The damage that occurs on the teeth flank of cylindrical gears is a complex phenomenon and depends on many factors. The most common cause for these damages is the high contact stress of the meshing gears. Although this c...
Assessment of factors affecting the software process improvement in small organizations
Software process improvement implies a set of complex and systematic activities of software engineering. It requires theory and models established in management, technical and social sciences. The improvement is based on...