Morphology of Nickel Matrix Composite Coatings with Nano- Silicon Dispersion Phase
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 3
Abstract
In this paper is presented the morphology of nickel metal layers, nickel matrix composite and particles dispersed phase, obtained by electrodeposition on steel base, using nickel sulphate as electrolyte. Nickel anodes used were of 99.9% purity. Experimental investigations were carried out at the temperature of 293 K and various current densities for 1h, with different stirring rates of electrolyte and silicon powder concentrations. The coatings were deposited on a carbon steel substrate which was kept vertically in the solution. The inclusion of silicon particles about 50 nm led to significant hardening of nickel composite matrix.
Authors and Affiliations
Gina ISTRATE, Petrica ALEXANDRU, Olga MITOSERIU, Mihaela MARIN
Keywords
Related Articles
- EP ID EP626956
- DOI -
- Views 94
- Downloads 0
Urban Pollution Issues Generated by Trams Traffic
The modern society development involves new and diverse issues considering urban environmental pollution. Traffic generated sound and vibration are two upto-date urban environmental pollution causes besides air and water...
Materials Used for Manufacturing Some Objects from 1600 before Christ – 500 after Christ Period
The appearance and the spreading of metallic objects produced a profound social change. The early metallurgy included two ages: The Bronze Age and The Iron Age. The late Bronze Age is considered to be the most important...
Characterisation of Niobium Carbide Coating Obtained by Chemical Vapour Deposition
The experiments conducted to obtain thin layer of carbide by the vapour chemical deposition method have followed an original path to make NbC directly in the working room thus avoiding the import of these hazardous subst...
Electrochemical Modifications of Titanium and Titanium Alloys Surface for Biomedical Applications – A Review
The field of biomaterials requires the input of knowledge from very different areas such as biology, medicine and engineering so that the implanted material in a living body to not induce any adverse impacts. The paper f...
Producing Bimetals by Direct Melting of the Bronze Machining Chips into Steel Supports
The bimetals can satisfy some requests of the working conditions impossible to be obtained using one single metallic material. The bimetallic pieces are obtained by the different production methods by covering of a steel...