About the Analytical Methods Applying for Fault Diagnosis of the Static Converters from the Electric Locomotive
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2015, Vol 39, Issue 39
Abstract
In this paper, the results of the monitoring and diagnosis system based on the analytical methods of the auxiliary ventilation service of the electric locomotive which is supplied from the static converter are presented. Because of the complexity of the electric locomotive structure and of the big number of components, a large number of the parameters must be monitored and detected the range of variation of their imposed values. Consequently, a large variety of monitoring and diagnosis procedures have been developed. In literature in the field, the many advanced fault diagnosis methods were presented. Using the analytical method, the analytical model of the static converter was developed using the Matlab Simulink. Starting from the model of the static converter, three types of the faults were simulated: losing inverter supply, interrupting of the inverter output phase and biphasic shortcircuit at inverter output. For all three types of mentioned faults, the waveforms of motor speed, electromagnetic torque and electric currents have been registered. These waveforms were compared with those corresponding to the normal operation regime. The impact of the type of fault on the waveforms was pointed out. The results were analyzed based on the evolution of the motor parameters in the normal and abnormal operating regime.
Authors and Affiliations
Maria Brojboiu, Virginia Ivanov, Andrei Savescu
Keywords
Related Articles
- EP ID EP122901
- DOI -
- Views 139
- Downloads 0
MODULAR TRANSVERSAL FLUX TUBULAR MACHINE – PRESENTATION AND PROGRESS ACHIEVEMENTS
This paper proposes an interesting new type of tubular machine that can work like a tubular motor or a tubular generator. The machine’s topologies for both operating regimes are presented here. In the paper a prototype o...
Electromagnetic Field Coupling Between Over-Head Power Lines and Nearby Metallic Pipelines in Case of Direct Lightning
Lightning-induced voltages in power systems are nowadays one of the causes of the main power quality and electromagnetic compatibility issues. In recent years, due to the increasing demand by customers for good qua...
Performance of an Active DC-Traction Substation with 12-Pulse Parallel Rectifier and Indirect Current Control
The attention in this paper is directed to the transformation of an existing DC-traction substationsequipped with 12-pulse parallel uncontrolled rectifier into an active substation. In this manner, the traction sub...
Presentation of a new design current supply based on inductive ballast; ripple comparison with SMPS
This paper presents a new design approach of a very low cost LED power supply. The innovation comes from the reusage of the inductive ballast already functioning in street lighting solutions based on fluorescent lamps. N...
Shielding Effectiveness Measurement Using a DTEM Cell
This paper presents a shielding effectiveness evaluation for some metallic threads materials. The tests were performed using a non-standardized method in a dual transversal electromagnetic cell (DTEM). The materials’ shi...