AlN thin Film Coated Cu Substrates as Heat Sink for High Power LED Applications
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 2, Issue 12
Abstract
Heat generates from power electronics must be dissipated to maintain operating temperatures within specification. Thermal management is an important design consideration in which thermal interface material (TIM) plays important role on reducing the thermal resistance between hot and cold points. AlN thin film and AlN/Al stack were used as TIM and Cu substrates was used as heat sink. The observed total thermal resistance (Rth-tot) was low for AlN thin film coated Cu substrate. Noticeable decrease in junction temperature (TJ) rise (∆TJ = 6 °C) was recorded for the LED using AlN thin film as TIM. AlN and AlN/Al thin film stack were not supported to enhance the luminosity of the given 3W LED but driving current influenced on optical properties noticeably.
Authors and Affiliations
S. Shanmugan*1
Comparative study of PCA and ICA in the field of Data Reduction
This paper presents the results of a comparative study of Pca and Ica in the field of data reduction. In particular, we compare the two feature extraction techniques- independent component analysis (ICA) and Princ...
EFFICACY OF A COATING COMPOSED OF CARBOXYMETHYL CELLULOSE AND WHEY PROTEIN CONCENTRATE TO CONTROL THE QUALITY OF JAGGERY
This study evaluated the efficacy of coating composed of Carboxymethyl Cellulose and Whey Protein Concentrate on the storage characteristics and storage quality conditions of coated jaggery for 15 weeks. The edibl...
WEAR ANALYSIS OF CLUTCH MATERIAL
A clutch is a very important machine element which plays a main role in the transmission of power from one component to another. A common and well known application for the clutch is in automotive vehicles where it is u...
Review Paper on Selective Coating of Absorber Tube for Parabolic Trough Collector
This paper describes the various coatings used for absorber tube of Parabolic Trough Collector (PTC) and their properties. Solar thermal selective absorber coatings are currently characterized by their solar absor...
INFLUENCE OF INOCULUM PERCENTAGE ON BIOGAS PRODUCTION FROM MUNICIPAL SOLID WASTE USING COW DUNG AS INOCULUM
Anaerobic digestion of municipal solid waste was carried out in this study for 60 days at room temperature in batch reactor with different percentage of cow dung as inoculum. The digestion was carried out in laboratory...