Application of between- stand cooling in the production hot – rolled strips
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 37
Abstract
Medium grain size has been uneven over the length of hot-rolled strips of austenite of low-carbon steel during rolling on continuous mill. Assess the possibilities of metal microstructure of hot-rolled strip stabilization system between-stand refrigeration line. Rolling low carbon strips developed modes with increasing temperature end rolling along the length of the strips and rolling modes using between-stand cooling with variable flow cooling water. Using this technology mode allows you to get a uniform cooling microstructure of metal strips and cut to length machine time rolling on 14 – 18%. Treatment with an increased acceleration stabilizes the metal microstructure on rolling strips on top of the thread speed and reduces the machine time rolling on 3-9%.
Authors and Affiliations
U. Muhin, S. Belskij, E. Makarov, T. Koynov
Keywords
Related Articles
- EP ID EP159509
- DOI 10.3221/IGF-ESIS.37.41
- Views 58
- Downloads 0
Bond-slip analysis via a cohesive-zone model simulating damage,friction and interlocking
A recently proposed cohesive-zone model which effectively combines damage, friction andmechanical interlocking has been revisited and further validated by numerically simulating the pull-out test,from a concrete bl...
Microstructure dependence of fatigue crack propagation behavior in wrought magnesium alloy
This paper deals with the fatigue crack propagation behavior of rolled AZ31B magnesium alloy (grain size: approximately 40 m). Fatigue crack propagation tests were performed on single edge notched tension sp...
An efficient Bouc & Wen approach for seismic analysisof masonry tower
The assessment of existing masonry towers under exceptional loads, such as earthquake loads,requires reliable, expedite and efficient methods of analysis. These approaches should take into account boththe randomnes...
Gradient enriched linear-elastic crack tip stresses to estimate the static strength of cracked engineering ceramics
According to Gradient Mechanics (GM), stress fields have to be determined by directly incorporating into the stress analysis a length scale which that takes into account the material microstructural features. This...
Effective properties of a new auxetic triangular lattice:an analytical approach
In this article we propose a new auxetic periodic lattice with negative Poisson's ratio which tends tothe limit ν=-1 under particular conditions. We have studied its generation and kinematic, and we give a fulldesc...