Comparision Of Materials For Two-Wheeler Connecting Rod Using Ansys
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2013, Vol 4, Issue 9
Abstract
Connecting rod is a major link inside of a internal combustion engine. Its primary function is to transmit the push and pull from the piston pin to the crank pin thus converting the reciprocating motion of piston in to rotary motion of the crank. In the present investigation a 4-stroke petrol engine of a specified model, market available connecting rod is selected for the investigation. For present investigation the designed connecting rod is modeled using solid modeling software i.e. PRO/E.The modeled connecting rod imported to the analysis software i.e. ANSYS. Static analysis is done to determine von-misses stresses, strain, shear stress and total deformation for the given loading conditions using analysis software i.e. ANSYS. In this analysis two materials are selected and analyzed. The software results of two materials are compared and utilized for designing the connecting rod
Authors and Affiliations
B. Anusha#1 , Dr. C. Vijaya Bhaskar Reddy
Keywords
Related Articles
- EP ID EP157065
- DOI -
- Views 137
- Downloads 0
Analysis of Bandwidth Recycling in IEEE 802.16 Network Using PSA, RB-RFA & HSA
IEEE 802.16 network protocol is designed to provide a Worldwide Interoperability for Microwave Access (WiMAX). Due to limited bandwidth and an expensive radio spectrum available for communication, it is necessary to use...
Preparation of Cotton Methyl Ester and Cotton Ethyl Ester for Shock Tube Investigation
This paper describes an experimental effort for the production of cotton methyl ester (CME) and cotton ethyl ester (CEE) from neat cottonseed oil (CSO) for use as a biodiesel fuel and investigation the ignition delay tim...
Design an Embedded Web Server for Monitoring and Controlling Systems or Devices
The paper presents the design of embedded web server based on ARM9 Micro-processor and Linux platform and analyses hardware configuration and software implementation for monitoring and controlling systems or device...
Review On Different Types Of Router Architecture And Flow Control
NoC (Network on chip) is a new technology for designing of communication structure in SoC design. Where large number of IP blocks communicates with each other. Router is the backbone of NoC design which handles the com...
K-LEACH: An improved LEACH Protocol for Lifetime Improvement in WSN
A Wireless Sensor Network is the collection of large number of sensor nodes, which are technically or economically feasible and measure the ambient condition in the environment surrounding them. The difference betw...