Experimental Investigation of Material Removal Rate on H-13 Using Powder Metallurgy and Conventional Electrodes
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 5
Abstract
Electric discharge machining is most widely used method for machining materials which are used mostly for making tools such as Die steel, tool steel which are difficult to machine by simple methods. It was found that considerable research has been done on various aspects of electrical discharge machining of low carbon steels, carbides and a few die steels but sufficient data is not available on H-13 even though it is widely used in pressure die casting tools, extrusion tools, forging dies, stamping dies, plastic molds etc. Hence there is a need to investigate the machining of this material with copper chromium (CuCr) electrodes (made through powder metallurgy technique) by varying different machining parameters such as discharge current, gap voltage, duty cycle, polarity, retract distance and flushing pressure and their effect on Material Removal Rate ( MRR). It was found that Machining rate increases with the increase in current due to predominant increase in spark energy. Positive polarity with powder metallurgy electrode (80%Cu 20%Cr) at current value (10A) and duty cycle (0.9) gives the best results for MRR.
Authors and Affiliations
Gaurav Mittal*
Keywords
Related Articles
- EP ID EP148420
- DOI -
- Views 60
- Downloads 0
DOUBLE DIRICHLET AVERAGE OF M - FUNCTION AND FRACTIONAL DERIVATIVE
The object of the preset paper is to establish a result of Double Dirichlet average of M - function [14] by using fractional derivative.
STUDY OF THE VARIATIONS OF THE MACROSCOPIC ELECTRIC PARAMETERS OF A SOLAR CELL ACCORDING TO THE USE TEMPERATURE
The Research has for objective to increase the performances of the thin film solar cells. Many scientific publications were interested by the development of the thin films which make the cell. Others based their r...
COPOLYMERS OF MA/EA/BA WITH N-SUBSTITUTED MALEIMIDE: SYNTHESIS,CHARACTERIZATION AND EFFECT ON THE THERMAL PROPERTIES
Copolymers of N-[4-(acetylamino) phenyl] maleimide (AAPMI) were synthesized by reacting with Methyl acrylate (MA)/Ethyl acrylate (EA)/Butyl acrylate (BA). All polymers show good solubility in polar solvent. Po...
Removal of Colour from Textile Wastewater Using Two- Step Coagulation Process
The waste water from the textile dyeing industry produces large amount of coloured water and this needs to be treated before discarding in the ecosystem. There are various treatment technologies to remove colour f...
SCHRÖDINGER QUANTUM EQUATION FROM CLASSICAL AND QUANTUM HARMONIC OSCILLATOR
A new quantum model that accounts for the medium friction is derived. The first advantage is the addition of natural oscillation of particle. The second advantage is the incorporation of frication effect in the Ha...