Fatigue failure analysis of pin-loaded lugs
Journal Title: Frattura ed Integrità Strutturale - Year 2016, Vol 10, Issue 35
Abstract
In the present paper, mathematical models are proposed in order to analyze the strength of pinloaded lugs with semi-elliptical crack and through-the-thickness crack. The crack growth investigation of considered crack configurations tackles the fatigue life evaluation and the crack path simulation of semi-elliptical crack. The residual strength is estimated by applying the two-parameter driving force model. The numerical and analytical approaches are employed for the stress intensity factor calculation. Experimental fatigue crack growth data are used in order to verify efficiency of the developed models. A good correlation between fatigue crack growth estimations and experimental observations is obtained.
Authors and Affiliations
Slobodanka Boljanović, Stevan Maksimović
Keywords
Related Articles
- EP ID EP90484
- DOI 10.3221/IGF-ESIS.35.36
- Views 70
- Downloads 0
Structural transitions in a NiTi alloy: a multistage loading-unload cycle
NiTi shape memory alloys (SMAs) are increasingly used in many engineering and medical applications, because they combine special functional properties, such as shape memory effect and pseudo-elasticity, with good mechani...
Research on parameters optimization of bilateral ring gear blank-holder in thick-plate fine blanking
To compensate for the poor quality of thick-plate blanking parts in cross-section, this paper suggests using the optimizing bilateral ring gear holder parameters to increase burnish zone and improve cutting preci...
Response of porous SMA: a micromechanical study
Lately porous shape memory alloys (SMA) have attracted great interest as low weight materialscharacterized by high energy dissipation capability. In the present contribution a micromechanical study ofporous SMA is...
Fatigue crack growth behavior of Inconel 718 produced by selective laser melting
Additive layer manufacturing has recently gained a lot of interest due to the feasibility of producing metallic components directly from a computer-aided design file of the part. Selective laser melting, one of th...
Quantitative estimating size of deep defects in multi-layered structures from eddy current NDT signals using improved ant colony algorithm
Detection and quantitative estimation of deep defects in multi-layered structures is an essential task in a range of technological applications, such as maintaining the integrity of structures, enhancing the safety...