MIX MATRIX MODELING OF TWO-PORT SURFACE ACOUSTIC WAVE DEVICE FOR PROTEIN CHARACTERIZATION
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 8
Abstract
Presented research describes finite element modeling of Two-Port surface acoustic wave devices used for protein characterization. Typical SAW device converts electrical energy into a mechanical wave on a single crystal substrate. It provides very complex signal processing in a very small volume. It is estimated that approximately 4 billion SAW devices are produced each year. SAW devices are sensitive to temperature, stress, pressure, liquids, viscosity and surface effects, a wide range of sensors are possible. The devices are small, rugged, stable, and capable of high volume low cost production. Research focus is on studying finite element modeling of this devices based on mix matrix methods to characterize conductance, susceptance, viscosity, and other properties of protein samples, like albumin using Two-Port SAW related resonator.
Authors and Affiliations
Vishal M. Dhagat
Keywords
Related Articles
- EP ID EP90850
- DOI 10.5281/zenodo.60122
- Views 85
- Downloads 0
Implementation of AOMDV, OLSR & ZRP Protocol for Analysis of Performance Matrices in VANET Scenario
Vehicular Ad-Hoc Network (VANET) is a wireless technology which is the sub class of the Mobile Ad-Hoc Networks (MANET). In our work we are trying to provide connectivity to vehicles for enabling Intelligent Trans...
Optimal Placement of Multiple Distributed Generators in HVDC System for Performance Improvement
Distributed generators are one of the important external sources in the power distribution system. Installing DGs at the optimum load centers will prevent the new transmission lines extension to energize substatio...
CHARACTERIZATION OF CHLOROFORM EXTRACT OF CORDIA MACLEODII LEAF FOR POSSIBLE APPLICATION IN DYE SENSITIZED SOLAR CELL
Dye synthesized solar cells have received intensified research efforts in the past decades in both academia and industry, due to the increasing demand for sustainable clean energy. Dyes play an important role in t...
Design and Implementation of BISR for 3d Multiple SRAMS with Redundancies in a SOC
Embedded memories contain several hundreds of memory cores which constitute a significant portion of the chip area for typical system-on-chip (SOC) designs. With the shrinking transistor size and aggressive design...
PERFORMANCE ANALYSIS OF OZONE LAYER FRIEN DLY REFRIGERENT AS A POSSIBLE REPLACEMENT OF R - 22 IN VAPOUR COMPRES SION REFRIGERATION SYSTEM
The Montreal protocol set out mandatory time table to phase out R - 22 by 2016. This paper hence discusses the alternative of R - 22 in vapor compression refrigeration system. R - 22 is replaced by a mixture of r...