Modelling and Simulation of High Step up Dc-Dc Converter for Micro Grid Application
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2013, Vol 3, Issue 1
Abstract
Abstract: The distributed generation (DG) systems based on the renewable energy sources have rapidly developed in recent years. These DG systems are powered by micro sources such as fuel cells, photovoltaic (PV) systems, and batteries. The micro grid concept consists of two stages, in the first stage the low level voltage from the pv cell is converted to high level voltage by using DC-DC converter. In the second stage the high level DC voltage is converted into AC voltage by using an inverter and is supplied to load. This paper proposes a novel High Step-up DC-DC converter for micro grid application. The proposed converter is modelled and simulated along with pv cell and inverter through MATLAB/SIMULINK for AC load. The proposed converter has high voltage gain and efficiency. The results are successfully verified.
Authors and Affiliations
B. D. S Prasad
Keywords
Related Articles
- EP ID EP125438
- DOI -
- Views 121
- Downloads 0
Sustainability Index Measurement of Energy Efficient Skyscrapers: Present Indian Perspective
Abstract: During last century development of skyscraper have been rapidly increasing worldwide. The present fifth generation skyscrapers are influenced by the energy conservation and sustainable strategies. This p...
Comparison of Maximum Stress distribution of Long & Short Side Column due to Blast Loading
A bomb explosion within or immediately nearby a building can cause catastrophic damage on the building's external and internal structural frames like RC column, slab, beam, collapsing of walls, blowing out of larg...
Elemental Composition of Fine Particulate Matters from the Exhaust Emission of Jeepneys Plying the Route of Taft Avenue, Manila, Philippines
Abstract: Elemental composition of fine particulate matters coming from the vehicular exhaust emission of jeepneys plying the route of Taft Avenue, Manila, Philippines was identified using SEM/EDX technique....
Effect of process parameters on surface roughness during grinding of hot work steel AISI H11 under dry, wet and compressed gas environment
The major demands in machining of parts are closely controlling both geometrical accuracy and dimensional of engineering component made up of difficult to shape material is increasing continuously. Surface roug...
Data Routing in In-network Aggregation in WSN: a Cluster Based approach
: Large scale wireless sensor networks (WSNs) consists of many sensor nodes & these networks are deployed in different classes of applications for accurate monitoring, health, environment etc. The sensor node...