On the notch sensitivity of cast iron under multi-axial fatigue loading
Journal Title: Frattura ed Integrità Strutturale - Year 2014, Vol 8, Issue 30
Abstract
This work deals with the notch sensitivity of sharp notches under multi-axial fatigue loading. The main discussion concerns the differences in notch sensitivity at high cycle fatigue regime, between tensile, torsional and combined loading. For this comparison, this paper considers a large set of fatigue experimental tests and several computing simulations analyzed with several notch theories for predicting fatigue life of a component. The considered experimental data, taken from literature, deal with the fatigue behavior of cast iron circumferentially V-notched specimens under tension, torsion, and combined loading mode. This paper tries to apply several techniques for theoretical strength assessment and to compare different procedures. The examined procedures need the computation of many parameters, focusing on the importance of using the tensile resistance to set these parameters or using both tensile and torsion resistances. However, the improvements obtained by means of the more complex procedures are not noteworthy, compared to the overall scatter. In author’s opinion, the differences in notch sensitivity under tensile and torsional loading remain questionable.
Authors and Affiliations
P. Livieri, E. Maggiolini, R. Tovo
Keywords
Related Articles
- EP ID EP88940
- DOI -
- Views 81
- Downloads 0
Use of FBG sensors for monitoring cracks of the equestrian statue of Bartolomeo Colleoni in Venice
The Bartolomeo Colleoni monument suffered for years damage from the local climate. The process of restoring the Colleoni equestrian statue, started in 2003, allowed to understand how the bronze statue was origina...
Fatigue crack growth in additive manufactured products
Additive Manufacturing (AM) is a new innovative technique that allows the direct fabrication of complex, individual, delicate and high-strength products, based on their 3D data. Selective Laser Melting (SLM) ...
Development of a Very High Cycle Fatigue (VHCF) multiaxial testing device
The very high cycle region of the S-N fatigue curve has been the subject of intensive research on the last years, with special focus on axial, bending, torsional and fretting fatigue tests. Very high cycle fatigue...
Fatigue crack growth prediction in 2xxx AA with friction stir weld HAZ properties
An analytical model is developed to predict fatigue crack propagation rate under mode I loading in 2024 aluminum alloy with FSW HAZ material characteristics. Simulation of the HAZ local properties in parent 2...
Estimating macro-, micro-, and nano-hardness of metallic materials from elasto-plastic finite element results
This paper summarises an attempt of estimating macro-, micro-, and nano-hardness of metallic materials through conventional elasto-plastic finite element (FE) analyses. In more detail, to verify if the classical FE...