NOISE EXPOSURE DURING AMBULANCE FLIGHTS AND REPATRIATION OPERATIONS
Journal Title: International Journal of Occupational Medicine and Environmental Health - Year 2010, Vol 23, Issue 4
Abstract
[b]Objectives: [/b]Although ambulance flights are routine work and thousands of employees work in repatriation organizations, there is no data on noise exposure which may be used for preventive advice. We investigated the noise exposure of crews working in ambulance flight organizations for international patient repatriation to get the data for specific guidelines concerning noise protection. [b]Material and Methods: [/b]Noise levels inside Learjet 35A, the aircraft type which is most often used for repatriation operations, were collected from locations where flight crews typically spend their time. A sound level meter class 1 meeting the DIN IEC 651 requirements was used for noise measurements, but several factors during the real flight situations caused a measurement error of ~3%. Therefore, the results fulfill the specifications for class 2. The data was collected during several real repatriation operations and was combined with the flight data (hours per day) regarding the personnel to evaluate the occupationally encountered equivalent noise level according to DIN 45645-2. [b]Results and Conclusions: [/b]The measured noise levels were safely just below the 85 dB(A) threshold and should not induce permanent threshold shifts, provided that additional high noise exposure by non-occupational or private activities was avoided. As the levels of the noise produced by the engines outside the cabin are significantly above the 85 dB(A) threshold, the doors of the aircraft must be kept closed while the engines are running, and any activity performed outside the aircraft — or with the doors opened while the engines are running — must be done with adequate noise protection. The new EU noise directive (2003/10/EG) states that protective equipment must be made available to the aircrew to protect their hearing, though its use is not mandatory.
Authors and Affiliations
THOMAS KÜPPER, BERND ZIMMER, GERSON CONRAD, PAUL JANSING, ALINE HARDT
EFFECT OF CHANGES IN FINGER SKIN TEMPERATURE ON VIBROTACTILE PERCEPTION THRESHOLD
[b]Objectives:[/b] The purpose of the study was to determine the influence of finger skin temperature on the vibrotactile perception threshold at fingertips, determined according to the method described in ISO 13091-1 st...
National survey of health in the tattoo industry: Observational study of 448 French tattooists
Objectives: The data regarding the health of professional tattooists is inexistent. Tattooists are usually heavily tattooed and exposed daily to body fluids and skin-to-skin contacts with customers, tattoo inks, solvents...
Immunological and genotoxic effects of occupational exposure to α-cypermethrin pesticide
Objectives: The aim of this work has been to find out the occupational oxidative stress, immunological and genotoxic health hazards among α-cypermethrin (CYP) pesticide-exposed workers. Material and Methods: A cross-sect...
Occupational exposure to bisphenol A (BPA) in a plastic injection molding factory in Malaysia
Objectives: The purpose of this study has been to assess ambient bisphenol A (BPA) levels in workplaces and urine levels of workers and to establish a BPA database for different populations in Malaysia. Material and Meth...
Experiencing a probabilistic approach to clarify and disclose uncertainties when setting occupational exposure limits
Objectives: Assessment factors (AFs) are commonly used for deriving reference concentrations for chemicals. These factors take into account variabilities as well as uncertainties in the dataset, such as inter-species and...