Normal Force Influence on 3D Texture Parameters Characterizing the Friction Couple Steel – PBT + 10 % PTFE
Journal Title: Tribology in Industry - Year 2014, Vol 36, Issue 1
Abstract
This study presents the influence of the normal force on the surface quality of the friction couple steel – polybutylene terephthalate (PBT) + 10 % polytetrafluoroethylene (PTFE). There were calculated the average values of the amplitude and functional parameters, as obtained from investigating square areas on the wear tracks, with the help of a proposed methodology, for initial and tested surfaces generated on the blocks and on counterpart ring made of rolling bearing steel, for the following test conditions: three normal forces (F = 1 N, F = 2.5 N and F =5 N), three sliding speeds (v = 0.25 m/s, v = 0.50 m/s and v = 0.75 m/s) and a sliding distance of L = 7500 m. The conclusion of the research study was that the tested normal force range has an insignificant influence on the surface quality for the tested materials and parameters. This friction couple could be recommended for variable conditions (speed and load) in dry regimes.
Authors and Affiliations
C. Georgescu , L. Deleanu , C. Pirvu
Keywords
Related Articles
- EP ID EP147058
- DOI -
- Views 59
- Downloads 0
Shakedown Behavior in Multiple Normal Loading-Unloading of an Elastic-Plastic Spherical Stick Contact
The effect of strain hardening and hardening rule on shakedown behavior is studied in a multiple normal interaction process of an elastic plastic sphere against a rigid flat using finite element software ANSYS under full...
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
The aim of this study was to investigate the suitability of using recycled low density polyethylene (RLDPE) in wood board manufacturing. The composite board was produced by compressive moulding by increasing the percenta...
Comparative of the Tribological Performance of Hydraulic Cylinders Coated by the Process of Thermal Spray HVOF and Hard Chrome Plating
Due to the necessity of obtaining a surface that is resistant to wear and oxidation, hydraulic cylinders are typically coated with hard chrome through the process of electroplating process. However, this type of coating...
The Investigation of Coated Tools Tribological Characteristics Influence on the Cutting Process and the Quality Parameters of the Parts Surface Layer
The influence of cutting tools nanostructured coatings on the parameters of machined parts surface layer has been researched. The interaction between friction characteristics of coated tools and shear plane angle during...
Tribological Processes of the Mechanisms of Free Motion of Impulsive Friction Variators
Free motion mechanism (FMM) of the impulsive variators is one vital part in power transmiting of impulsive lever variators which oscillating motion of external envelope (coulisse) converted in rotation movement of the ou...