Numerical Methods for Transverse Vibration Analysis of Straight Euler and Timoshenko Beams
Journal Title: INCAS BULLETIN - Year 2019, Vol 11, Issue 3
Abstract
This paper presents a short review of numerical methods used for lateral vibration analysis in the case of straight Euler and Timoshenko beams. A particular integral method is described with more details. This approximate integral method is based on the use of flexibility influence functions (Green’s functions). It leads to a matrix formulation and to an eigenvalue problem for vibration analysis. The presented approach is able to estimate separately the shear effects and the rotary inertia effects and also the combined effects. Simple numerical examples are also presented for comparisons with analytical and finite elements results. The results show good agreement.
Authors and Affiliations
Viorel ANGHEL
Keywords
Related Articles
- EP ID EP630338
- DOI 10.13111/2066-8201.2019.11.3.2
- Views 127
- Downloads 0
End-to-end process of hollow spacecraft structures with high frequency and low mass obtained with in-house structural optimization tool and additive manufacturing
In the space sector the most decisive elements are: mass reduction, cost saving and minimum lead time; here, structural optimization and additive layer manufacturing (ALM) fit best. The design must be driven by stiffness...
Supersonic and transonic Mach probe for calibration control in the Trisonic Wind Tunnel
A supersonic and high speed transonic Pitot Prandtl is described as it can be implemented in the Trisonic Wind Tunnel for calibration and verification of Mach number precision. A new calculation method for arbitrary prec...
Aircraft noise footprint for Bucharest – Sophia flights
Studies of impact noise have traditionally focused on landing and takeoff procedures in the airports vicinity. Beside these studies, en-route noise is considered an issue when we talk about noise in natural reservation o...
Trim horizontal stabilizer for improving aircraft performances
In order to have a smooth movement between the trim horizontal stabilizer and the posterior fuselage, with a small influence on the aircraft performance, we had to envision such a mechanism which made the entire trim hor...
Lamb Waves Tunning On Aluminium Plates for Structure Health Monitoring
The method for defects detection inside the mechanical structures, namely aerospace structures, using the Lamb waves is widespread because of its benefits: it is nondestructive, may reveal the presence and size of defect...