Numerical Researches of the Prop of a 65 kW Wind Power Plant
Journal Title: Металлические конструкции - Year 2018, Vol 24, Issue 2
Abstract
This article presents the results of numerical research of the steel lattice support of a wind power plant (WPP) from angle profile. The main purpose of the work was to determine the forces and displacements from the action of loads caused by the operation of a 65 kW wind power plant. For this purpose, a spatial model of lattice supports with a cross, half-braced and triangular lattices was constructed and their numerical analysis was performed. The obtained results allowed to choose the optimal support for the «Vestas V-16» wind turbine, and also to determine the main loads acting on the support of the wind generator.
Authors and Affiliations
Andrey Alyokhin, Dmitriу Polyanskii
Keywords
Related Articles
- EP ID EP536502
- DOI -
- Views 88
- Downloads 0
Analysis of the influence of structural features of nodal connections on the load-carrying capacity of centrally compressed rods of structural coatings
The article presents the analysis of the stability of centrally compressed rods with initial geometric imperfections, performed with the help of volumetric finite element modeling of rods taking into account the design f...
Comparative Analysis of Solutions for Protection of the Coast of the Sea of Azov by Anchored Vertical Walls of Sheet Pile of Various Designs
The article discusses the problem of protection of the coast of the Azov Sea in difficult engineering-geological and hydrological conditions on the example seafront of the boarding house «Volna» in the village Sedovo. Th...
Comparative Analysis of the Calculation of an I-Beam Cross-Section Beam According to Eurocode 3 and SNiP II-23-81*
The article presents a comparative analysis of the beams of the I-beam cross-section according to Eurocode 3: “Steel structures” [1] and SNiP II-23-81* “Steel structures” [6]. The object of investigation was a beam of an...
Calculation Methods of Standard Surface Area of Flat Roofs for Internal Wasteway through Cast Iron Pipe and Funnel Set-point Diameters in the Transcarpathian Region
The calculation of standard surface areas of flat roofs made by SNiP II-32-74 and DBN V.2.5-75 2013 and according to data III B and IV climatic regions excluding the results of observations of precipitation at 9 weather...
Influence of Design Features of Power Lines to the Technology of their Construction
General information of the extent of backbone and interstate overhead power lines has been given. The classification of pylons has been presented. The advantages and disadvantages of the materials used for the supports h...