NUMERICAL SIMULATION OF TRUNCATED PYRAMIDAL CUPS OF AA1050-H18 ALLOY FABRICATED BY SINGLE POINT INCREMENTAL FORMING

Abstract

The purpose of the present project work was to understand the formability of AA1050-H18 alloy to fabricate truncated pyramidal cups using single point incremental forming (SPIF) process. The finite element analysis has been carried out to model the single point incremental forming process using ABAQUS software code. The process parameters of SPIF were sheet thickness, step depth, tool radius and coefficient of friction. The process parameters have been optimized using Taguchi techniques. The major process parameters influencing the SPIF of truncated pyramidal cups were tool radius and coefficient of friction.

Authors and Affiliations

V. Srija

Keywords

Related Articles

 KINETICS OF BIOGAS GENERATION USING DOMESTIC WASTES AS FEEDSTOCK

 Anaerobically, biogas was generated from decayed organic substances through fermentation induced by microbial activities in the bio-reactor. This study reports a pilot project on the kinetics of the biogas produce...

LPG Leakage Monitoring and Multilevel Alerting System

Liquefied Petroleum Gas (LPG) is an inevitable one in day-to-day life. LPG is used as a fuel in a range of applications including in heating and cooking appliances, industrial applications, in vehicles and as a propella...

 Microcontoller Based Gesture Controlled Wheelchair Using Accelerometer

 “Speech” and “gestures” are the expressions, which are mostly used in communication between human beings and for Human Computer Interaction (HCI). Recent development promises a wide scope in developing smart cont...

ERROR DETECTION USIN G BINARY BCH (255, 2 15, 5) CODES

Error - correction codes are the codes used to correct the errors occurred during the transmission of the data in the unreliable communication medi ums. Error detection is the detection of errors caused by noise or...

Download PDF file
  • EP ID EP117922
  • DOI 10.5281/zenodo.55981
  • Views 91
  • Downloads 0

How To Cite

V. Srija (30). NUMERICAL SIMULATION OF TRUNCATED PYRAMIDAL CUPS OF AA1050-H18 ALLOY FABRICATED BY SINGLE POINT INCREMENTAL FORMING. International Journal of Engineering Sciences & Research Technology, 5(6), 741-749. https://www.europub.co.uk/articles/-A-117922