Obtaining and modeling the relaxation modulus of self-healing asphalt mixtures
Journal Title: Firat University Journal of Experimental and Computational Engineering - Year 2022, Vol 1, Issue 1
Abstract
In this study, pure and self-healing asphalt mixture samples were obtained by adding capsules containing waste vegetable oil to mixtures at 0.25, 0.50, 0.75 and 1.00% ratios. Afterwards, creep test with a constant stress was carried out on the samples, and the resistance of asphalt mixtures against permanent deformation was investigated. Relaxation modulus values were obtained by using the creep compliance values that measured at the end of the experiment with mathematical transformations. Then, the relaxation modulus results were fitted to the Generalized Maxwell Model, which is a common model used to represent the viscoelastic properties of asphalt mixtures, and Prony series parameters were obtained. The results showed that the addition of capsule reduced the permanent deformation strength of the asphalt mixture. In addition, the curve fitting processes were successfully performed and the desired parameters were obtained with high accuracy.
Authors and Affiliations
Bahadır YILMAZ, Ahmet Münir ÖZDEMİR
Keywords
Related Articles
- EP ID EP711733
- DOI 10.5505/fujece.2022.43531
- Views 115
- Downloads 0
Characterization of polyurethane produced by polyol synthesized from corn oil
In this study, biopolyol has been synthesized from corn oil by epoxidation, hydroxylation, neutralization, and purification processes. The rheological properties of both corn oil and polyol obtained from corn oil have be...
Comparison of equivalent earthquake load method for TEC-2007 and TBEC-2018: Adıyaman province example
In this study, in terms of their approach to the equivalent earthquake load method, a comparison of the Turkish building earthquake codes published in 2007 and 2018 was made. For the study a reinforced concrete residenti...
SKLBP14: A new textural environmental sound classification model based on a square-kernelled local binary pattern
Nowadays, the forward-forward (FF) algorithm is very popular in the machine learning society, and it uses a square-based activation function. In this research, we inspired the FF algorithm and presented a new kernel for...
Numerical determination of the production rate and cumulative production in the constant pressure outer boundary condition
The flow regime is identified as a steady-state flow if the pressure at every location in the reservoir remains constant. In this work, we have determined the well production rate and cumulative production in a circular...
Surface characterization of commercial chitosan with SEM and BET techniques
Chitosan, a natural polymer, has recently been the focus of attention of researchers due to its superior properties such as biocompatible, biodegradable, renewable, and low toxicity. Especially in the fields of chemistr...